PartsTable
Technical Data Sheet
Download PDF

7HR826 — PIN,STRAIGHT,HEADED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

7HR826: PIN,STRAIGHT,HEADED.

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include height: 0.750 INCHES NOMINAL IN, diameter: 0.500 INCHES NOMINAL IN, material: STEEL COMP 1018 OVERALL, head_style: THUMB NO. 4, head_width: 0.875 INCHES NOMINAL IN, chamfer_length: 0.250 INCHES NOMINAL IN.

This part is cataloged in the U.S. Government catalog under NSN 5315-00-740-9017, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7HR826
NSN: 5315-00-740-9017
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 75Q65 — OSHKOSH DEFENSE LLC (USA)
SPECIFICATIONS
height0.750 INCHES NOMINAL IN
diameter0.500 INCHES NOMINAL IN
materialSTEEL COMP 1018 OVERALL
head_styleTHUMB NO. 4
head_width0.875 INCHES NOMINAL IN
chamfer_length0.250 INCHES NOMINAL IN
style_designatorSTRAIGHT
pin_chamfer_angle30.0 DEGREES NOMINAL
surface_treatmentENAMEL OVERALL
under_head_length5.250 INCHES NOMINAL IN
first_hole_diameter0.312 INCHES NOMINAL IN
hole_arrangement_styleDRILLED THRU HEAD
NSN5315-00-740-9017
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 7HR826 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CHAMFER LENGTH: 0.250 INCHES NOMINAL IN
•
HOLE ARRANGEMENT STYLE: DRILLED THRU HEAD
•
HEAD WIDTH: 0.875 INCHES NOMINAL IN
•
UNDER HEAD LENGTH: 5.250 INCHES NOMINAL IN
•
PIN CHAMFER ANGLE: 30.0 DEGREES NOMINAL
•
FIRST HOLE DIAMETER: 0.312 INCHES NOMINAL IN
•
STYLE DESIGNATOR: STRAIGHT
•
DIAMETER: 0.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
CHAMFER LENGTH0.250 INCHES NOMINAL IN
HOLE ARRANGEMENT STYLEDRILLED THRU HEAD
HEAD WIDTH0.875 INCHES NOMINAL IN
UNDER HEAD LENGTH5.250 INCHES NOMINAL IN
PIN CHAMFER ANGLE30.0 DEGREES NOMINAL
FIRST HOLE DIAMETER0.312 INCHES NOMINAL IN
STYLE DESIGNATORSTRAIGHT
DIAMETER0.500 INCHES NOMINAL IN
HEAD STYLETHUMB NO. 4
HEIGHT0.750 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 2
157E17Reference document
Same NSN cross-reference
Reference document — Secondary reference
2249Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 7HR826?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7HR826?
7HR826 is a PIN,STRAIGHT,HEADED.
What parts can replace 7HR826?
There are 2 known substitutes for 7HR826: 157E17, 2249. Substitute compatibility should be verified for your specific system.
What is the NSN for 7HR826?
7HR826 is cataloged in the U.S. Government catalog under NSN 5315-00-740-9017. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7HR826

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.