PartsTable / COMPONENT / 7G32124
7G32124
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CASE, case_style: RECESSEDRECESSED, seal_width: 0.296 INCHES MINIMUM AND 0.296 INCHES MINIMUM AND 0.328 INCHES MAXIMUM0.328 INCHES MAXIMUM IN, housing_bore_diameter: 1.249 INCHES MINIMUM AND 1.249 INCHES MINIMUM AND 1.251 INCHES MAXIMUM1.251 INCHES MAXIMUM IN, sealing_element_style: ANGULARANGULAR, accommodated_shaft_diameter: 0.748 INCHES MINIMUM AND 0.748 INCHES MINIMUM AND 0.752 INCHES MAXIMUM0.752 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-505-5146, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
7G32124
NSN: 5330-00-505-5146 FSC: 5330 CAGE: 23382 — FWD SEAGRAVE HOLDINGS LP (USA)
SPECIFICATIONS
material STEEL CASE case_style RECESSEDRECESSED seal_width 0.296 INCHES MINIMUM AND 0.296 INCHES MINIMUM AND 0.328 INCHES MAXIMUM0.328 INCHES MAXIMUM IN housing_bore_diameter 1.249 INCHES MINIMUM AND 1.249 INCHES MINIMUM AND 1.251 INCHES MAXIMUM1.251 INCHES MAXIMUM IN sealing_element_style ANGULARANGULAR accommodated_shaft_diameter 0.748 INCHES MINIMUM AND 0.748 INCHES MINIMUM AND 0.752 INCHES MAXIMUM0.752 INCHES MAXIMUM IN accommodated_shaft_maximum_rated_speed 2000 FEET PER MINUTE2000 FEET PER MINUTE FT NSN 5330-00-505-5146
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 7G32124
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• CASE STYLE: RECESSEDRECESSED
• MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
• SEALING ELEMENT STYLE: ANGULARANGULAR
• ACCOMMODATED SHAFT DIAMETER: 0.748 INCHES MINIMUM AND 0.748 INCHES MINIMUM AND 0.752 INCHES MAXIMUM0.752 INCHES MAXIMUM IN
• HOUSING BORE DIAMETER: 1.249 INCHES MINIMUM AND 1.249 INCHES MINIMUM AND 1.251 INCHES MAXIMUM1.251 INCHES MAXIMUM IN
• ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE2000 FEET PER MINUTE FT
• SEAL WIDTH: 0.296 INCHES MINIMUM AND 0.296 INCHES MINIMUM AND 0.328 INCHES MAXIMUM0.328 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CASE STYLE RECESSEDRECESSED MATERIAL RUBBER SYNTHETIC SEALING ELEMENT SEALING ELEMENT STYLE ANGULARANGULAR ACCOMMODATED SHAFT DIAMETER 0.748 INCHES MINIMUM AND 0.748 INCHES MINIMUM AND 0.752 INCHES MAXIMUM0.752 INCHES MAXIMUM IN HOUSING BORE DIAMETER 1.249 INCHES MINIMUM AND 1.249 INCHES MINIMUM AND 1.251 INCHES MAXIMUM1.251 INCHES MAXIMUM IN MATERIAL STEEL CASE ACCOMMODATED SHAFT MAXIMUM RATED SPEED 2000 FEET PER MINUTE2000 FEET PER MINUTE FT SEAL WIDTH 0.296 INCHES MINIMUM AND 0.296 INCHES MINIMUM AND 0.328 INCHES MAXIMUM0.328 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
2781-4 Interchangeable interchangeable cross-reference
interchangeable
RH19B25 Interchangeable interchangeable cross-reference
interchangeable
32530 Interchangeable interchangeable cross-reference
interchangeable
11M600 Interchangeable interchangeable cross-reference
interchangeable
AWO-227-1 Interchangeable interchangeable cross-reference
interchangeable
32124 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 7G32124?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7G32124?
7G32124 is a SEAL,PLAIN ENCASED.
What parts can replace 7G32124?
There are 22 known substitutes for 7G32124: 2781-4, RH19B25, 32530 and 19 more. Substitute compatibility should be verified for your specific system.
Is 7G32124 still available?
7G32124 is currently cancelled.
Request a Quote — 7G32124