PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 7G103
7G103 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The STRAPPING is a the manufacturer industrial component. Key specifications include width: 0.510 INCHES NOMINAL IN, length: 14.625 FEET NOMINAL FT, material: STEEL CORROSION RESISTING, thickness: 0.015 INCHES MINIMUM AND 0.019 INCHES MAXIMUM IN, perforation_feature: NOT INCLUDED. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-446-1331, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7G103
NSN: 5340-00-446-1331
FSC: 5340
CAGE: 23382 — FWD SEAGRAVE HOLDINGS LP (USA)
SPECIFICATIONS
width0.510 INCHES NOMINAL IN
length14.625 FEET NOMINAL FT
materialSTEEL CORROSION RESISTING
thickness0.015 INCHES MINIMUM AND 0.019 INCHES MAXIMUM IN
perforation_featureNOT INCLUDED
NSN5340-00-446-1331
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7G103 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PERFORATION FEATURE: NOT INCLUDED
•
MATERIAL: STEEL CORROSION RESISTING
•
THICKNESS: 0.015 INCHES MINIMUM AND 0.019 INCHES MAXIMUM IN
•
WIDTH: 0.510 INCHES NOMINAL IN
•
LENGTH: 14.625 FEET NOMINAL FT
TECHNICAL CHARACTERISTICS (FLIS)
PERFORATION FEATURENOT INCLUDED
MATERIALSTEEL CORROSION RESISTING
THICKNESS0.015 INCHES MINIMUM AND 0.019 INCHES MAXIMUM IN
WIDTH0.510 INCHES NOMINAL IN
LENGTH14.625 FEET NOMINAL FT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
915BUpgraded Successor
successor cross-reference
successor
85986W1ITEM28Interchangeable
interchangeable cross-reference
interchangeable
1154KITEM4Interchangeable
interchangeable cross-reference
interchangeable
591-5Interchangeable
IBM Hd SAS Aa Cable - 3 Meter
interchangeable
MIL-E-1/470Interchangeable
interchangeable cross-reference
interchangeable
DMS 84114BInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 7G103?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7G103?
7G103 is a STRAPPING.
What parts can replace 7G103?
There are 21 known substitutes for 7G103: 915B, 85986W1ITEM28, 1154KITEM4 and 18 more. Substitute compatibility should be verified for your specific system.
Is 7G103 still available?
7G103 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7G103

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026