PartsTable
Technical Data Sheet
Download PDF

7F2022 — PIN,TAPERED,THREADED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

7F2022: PIN,TAPERED,THREADED.

The PIN,TAPERED,THREADED is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include taper: 1.500 PER FOOT IN INCHES, material: STEEL OVERALL, taper_length: 2.000 INCHES NOMINAL IN, thread_class: 2A A, thread_length: 1.000 INCHES NOMINAL IN, thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-396-2639, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7F2022
NSN: 5315-00-396-2639
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 11083 — CATERPILLAR INC DIV CATERPILLAR DEFENSE (USA)
SPECIFICATIONS
taper1.500 PER FOOT IN INCHES
materialSTEEL OVERALL
taper_length2.000 INCHES NOMINAL IN
thread_class2A A
thread_length1.000 INCHES NOMINAL IN
thread_directionRIGHT-HAND
nominal_thread_size0.500 INCHES IN
taper_major_diameter0.807 INCHES MINIMUM AND 0.812 INCHES MAXIMUM IN
thread_quantity_per_inch20
thread_series_designatorUNIFIED NATIONAL COARSE (UNC)
NSN5315-00-396-2639
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 7F2022 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD LENGTH: 1.000 INCHES NOMINAL IN
•
TAPER MAJOR DIAMETER: 0.807 INCHES MINIMUM AND 0.812 INCHES MAXIMUM IN
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.500 INCHES IN
•
TAPER LENGTH: 2.000 INCHES NOMINAL IN
•
TAPER: 1.500 PER FOOT IN INCHES
•
THREAD CLASS: 2A A
•
THREAD QUANTITY PER INCH: 20
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS
THREAD LENGTH1.000 INCHES NOMINAL IN
TAPER MAJOR DIAMETER0.807 INCHES MINIMUM AND 0.812 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.500 INCHES IN
TAPER LENGTH2.000 INCHES NOMINAL IN
TAPER1.500 PER FOOT IN INCHES
THREAD CLASS2A A
THREAD QUANTITY PER INCH20
MATERIALSTEEL OVERALL
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 7F2022?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7F2022?
7F2022 is a PIN,TAPERED,THREADED.
What is the NSN for 7F2022?
7F2022 is cataloged in the U.S. Government catalog under NSN 5315-00-396-2639. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7F2022