PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 7EQH4676
7EQH4676 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CASE, case_style: SQUARE, seal_width: 0.437 INCHES NOMINAL IN, outside_diameter: 3.628 INCHES NOMINAL IN, special_features: W/INTEGRAL COVER PLATE, surface_treatment: PLASTIC CASE. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-854-2102, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7EQH4676
NSN: 5330-00-854-2102
FSC: 5330
CAGE: 57526 — FORD MOTOR COMPANY (USA)
SPECIFICATIONS
materialSTEEL CASE
case_styleSQUARE
seal_width0.437 INCHES NOMINAL IN
outside_diameter3.628 INCHES NOMINAL IN
special_featuresW/INTEGRAL COVER PLATE
surface_treatmentPLASTIC CASE
housing_bore_diameter3.624 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter2.625 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed3600 FEET PER MINUTE FT
NSN5330-00-854-2102
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7EQH4676 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ACCOMMODATED SHAFT DIAMETER: 2.625 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 3600 FEET PER MINUTE FT
•
CASE STYLE: SQUARE
•
SEAL WIDTH: 0.437 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 3.628 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
•
SURFACE TREATMENT: PLASTIC CASE
TECHNICAL CHARACTERISTICS (FLIS)
ACCOMMODATED SHAFT DIAMETER2.625 INCHES NOMINAL IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED3600 FEET PER MINUTE FT
CASE STYLESQUARE
SEAL WIDTH0.437 INCHES NOMINAL IN
OUTSIDE DIAMETER3.628 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
SURFACE TREATMENTPLASTIC CASE
SPECIAL FEATURESW/INTEGRAL COVER PLATE
MATERIALSTEEL CASE
SEALING ELEMENT STYLEANGULAR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
26209Interchangeable
interchangeable cross-reference
interchangeable
K860450REV2PT4Interchangeable
interchangeable cross-reference
interchangeable
CST-140-RSInterchangeable
interchangeable cross-reference
interchangeable
CH140-RInterchangeable
interchangeable cross-reference
interchangeable
CST140PHInterchangeable
interchangeable cross-reference
interchangeable
45117Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 7EQH4676?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7EQH4676?
7EQH4676 is a SEAL,PLAIN ENCASED.
What parts can replace 7EQH4676?
There are 10 known substitutes for 7EQH4676: 26209, K860450REV2PT4, CST-140-RS and 7 more. Substitute compatibility should be verified for your specific system.
Is 7EQH4676 still available?
7EQH4676 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7EQH4676

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026