PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 7EQ1175A
7EQ1175A ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING CASE, case_style: SHOULDERED, seal_width: 1.064 INCHES NOMINAL IN, surface_treatment: PASSIVATE CASE, housing_bore_diameter: 5.373 INCHES NOMINAL IN, sealing_element_style: VERTICAL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-781-3588, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7EQ1175A
NSN: 5330-00-781-3588
FSC: 5330
CAGE: 57526 — FORD MOTOR COMPANY (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING CASE
case_styleSHOULDERED
seal_width1.064 INCHES NOMINAL IN
surface_treatmentPASSIVATE CASE
housing_bore_diameter5.373 INCHES NOMINAL IN
sealing_element_styleVERTICAL
accommodated_shaft_diameter3.938 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed2000 FEET PER MINUTE FT
NSN5330-00-781-3588
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7EQ1175A MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEALING ELEMENT STYLE: VERTICAL
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
•
MATERIAL: STEEL CORROSION RESISTING CASE
•
ACCOMMODATED SHAFT DIAMETER: 3.938 INCHES NOMINAL IN
•
CASE STYLE: SHOULDERED
•
HOUSING BORE DIAMETER: 5.373 INCHES NOMINAL IN
•
SURFACE TREATMENT: PASSIVATE CASE
TECHNICAL CHARACTERISTICS (FLIS)
SEALING ELEMENT STYLEVERTICAL
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
MATERIALSTEEL CORROSION RESISTING CASE
ACCOMMODATED SHAFT DIAMETER3.938 INCHES NOMINAL IN
CASE STYLESHOULDERED
MATERIALLEATHER SEALING ELEMENT
HOUSING BORE DIAMETER5.373 INCHES NOMINAL IN
SURFACE TREATMENTPASSIVATE CASE
SEAL WIDTH1.064 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 28
FFS85TYPE2STYLE10PGRADE5Interchangeable
interchangeable cross-reference
interchangeable
MS35297-41Interchangeable
interchangeable cross-reference
interchangeable
180089Interchangeable
interchangeable cross-reference
interchangeable
6270Interchangeable
interchangeable cross-reference
interchangeable
0-841-5Interchangeable
interchangeable cross-reference
interchangeable
429088Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 7EQ1175A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7EQ1175A?
7EQ1175A is a SEAL,PLAIN ENCASED.
What parts can replace 7EQ1175A?
There are 28 known substitutes for 7EQ1175A: FFS85TYPE2STYLE10PGRADE5, MS35297-41, 180089 and 25 more. Substitute compatibility should be verified for your specific system.
Is 7EQ1175A still available?
7EQ1175A is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7EQ1175A

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026