PartsTable
Technical Data Sheet
Download PDF

7D5-05019 — RAMP FOLDING

✓ Government record, cited
— · GATE VALVE
PRODUCT OVERVIEW

7D5-05019: RAMP FOLDING.

The RAMP FOLDING is a the manufacturer industrial component. Key specifications include material: STEEL COMP 316 BODY, overall_width: 141.000 INCHES NOMINAL IN, overall_length: 245.500 INCHES NOMINAL IN, connection_type: UNTHREADED INTERNAL PIPE ALL ENDS, connection_style: SOCKET ALL ENDS, style_designator: STRAIGHT THRU. This part is cataloged in the U.S.

Government catalog under NSN 4820-01-440-6192, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7D5-05019
NSN: 4820-01-440-6192
NIINs: 014406192, 014406657, 014449482
FSC: 4820 — Valves, Nonpowered
CAGE: 34712 — LAKE SHORE SYSTEMS, INC. (USA)
SPECIFICATIONS
materialSTEEL COMP 316 BODY
overall_width141.000 INCHES NOMINAL IN
overall_length245.500 INCHES NOMINAL IN
connection_typeUNTHREADED INTERNAL PIPE ALL ENDS
connection_styleSOCKET ALL ENDS
style_designatorSTRAIGHT THRU
valve_operation_methodMANUAL
end_item_identificationELEVATOR
nominal_pipe_size_accommodated1.000 INCHES ALL ENDS IN
general_characteristics_item_descriptionMATERIAL; VARIOUS
NSN4820-01-440-6192
COMPONENT DIAGRAM
GATE VALVE — FULL OPEN OR FULL CLOSE ONLY Rising STEM BONNET FLOW → → FLOW SEATS — — SIZE: — · — · — PN: 7D5-05019 · OEM ⚠ VERIFY BEFORE ORDERING Gate valves = FULL OPEN or FULL CLOSE only — never throttle. Partial opening causes seat erosion and vibration. ✓ BROKER TIP Rising stem shows valve position visually — easier maintenance. Non-rising stem saves headroom. PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NOMINAL PIPE SIZE ACCOMMODATED: 0.750 INCHES ALL ENDS IN
•
CONNECTION STYLE: SOCKET ALL ENDS
•
CONNECTION TYPE: UNTHREADED INTERNAL PIPE ALL ENDS
•
STYLE DESIGNATOR: STRAIGHT THRU
•
MATERIAL: STEEL COMP 316 BODY
•
VALVE OPERATION METHOD: MANUAL
TECHNICAL CHARACTERISTICS
NOMINAL PIPE SIZE ACCOMMODATED0.750 INCHES ALL ENDS IN
CONNECTION STYLESOCKET ALL ENDS
CONNECTION TYPEUNTHREADED INTERNAL PIPE ALL ENDS
STYLE DESIGNATORSTRAIGHT THRU
END ITEM IDENTIFICATIONWASP CLASS LHD
MATERIALSTEEL COMP 316 BODY
VALVE OPERATION METHODMANUAL
SUBSTITUTES & CROSS-REFERENCES 3
3/4IN H466YV SWReference document
Same NSN cross-reference
Reference document — Design control — primary reference
7D8-05151-2Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
7D8-05151Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 7D5-05019?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7D5-05019?
7D5-05019 is a RAMP FOLDING.
What parts can replace 7D5-05019?
There are 3 known substitutes for 7D5-05019: 3/4IN H466YV SW, 7D8-05151-2, 7D8-05151. Substitute compatibility should be verified for your specific system.
What is the NSN for 7D5-05019?
7D5-05019 is cataloged in the U.S. Government catalog under NSN 4820-01-440-6192. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7D5-05019

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.