PartsTable
Technical Data Sheet
Download PDF

7D3-08140 — HOSE ASSEMBLY,NONMETALLIC

✓ Government record, cited
— · GATE VALVE
PRODUCT OVERVIEW

7D3-08140: HOSE ASSEMBLY,NONMETALLIC.

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include material: STEEL BODY, body_width: 1.000 INCHES NOMINAL IN, body_height: 3.470 INCHES NOMINAL IN, body_length: 3.040 INCHES NOMINAL IN, pilot_ratio: 3 TO 13 TO 1, inclosure_type: FULLY INCLOSED. This part is cataloged in the U.S.

Government catalog under NSN 4820-01-512-6014, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7D3-08140
NSN: 4820-01-512-6014
NIINs: 015126014, 015126026, 015126045, 015126078, 015126086, 015128659, 015137709, 016269304, 016269312
FSC: 4820 — Valves, Nonpowered
CAGE: 34712 — LAKE SHORE SYSTEMS, INC. (USA)
SPECIFICATIONS
materialSTEEL BODY
body_width1.000 INCHES NOMINAL IN
body_height3.470 INCHES NOMINAL IN
body_length3.040 INCHES NOMINAL IN
pilot_ratio3 TO 13 TO 1
inclosure_typeFULLY INCLOSED
connection_typeTHREADED INTERNAL PIPE ALL ENDS
mounting_methodINTERNAL THREAD
connection_stylePLAIN,OPTIONAL END(PIPE) ALL ENDS
special_featuresEND ITEM:DAVIT,SLEWING SYSTEM BOAT,HYDRAULIC
style_designatorANGLE
thread_directionRIGHT-HAND ALL ENDS
NSN4820-01-512-6014
COMPONENT DIAGRAM
GATE VALVE — FULL OPEN OR FULL CLOSE ONLY Rising STEM BONNET FLOW → → FLOW SEATS — — SIZE: — · — · — PN: 7D3-08140 · OEM ⚠ VERIFY BEFORE ORDERING Gate valves = FULL OPEN or FULL CLOSE only — never throttle. Partial opening causes seat erosion and vibration. ✓ BROKER TIP Rising stem shows valve position visually — easier maintenance. Non-rising stem saves headroom. PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ADJUSTABLE PRESSURE RANGE: +50.0 TO 500.0 POUNDS PER SQUARE INCH LBS
•
DISK LOADING METHOD: SPRING
•
MATERIAL: STEEL BODY
•
VALVE OPERATION METHOD: AUTOMATIC
TECHNICAL CHARACTERISTICS
ADJUSTABLE PRESSURE RANGE+50.0 TO 500.0 POUNDS PER SQUARE INCH LBS
DISK LOADING METHODSPRING
PART NAME ASSIGNED BY CONTROLLING AGENCYMODLE RV08-20 RELIEF VALVE
END ITEM IDENTIFICATIONDAVIT, SLEWING
MATERIALSTEEL BODY
VALVE OPERATION METHODAUTOMATIC
SUBSTITUTES & CROSS-REFERENCES 2
RV08-20H-6TS-NC-5/2.0Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
7D3-08140 REV J ITEM 8Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 7D3-08140?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7D3-08140?
7D3-08140 is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace 7D3-08140?
There are 2 known substitutes for 7D3-08140: RV08-20H-6TS-NC-5/2.0, 7D3-08140 REV J ITEM 8. Substitute compatibility should be verified for your specific system.
What is the NSN for 7D3-08140?
7D3-08140 is cataloged in the U.S. Government catalog under NSN 4820-01-512-6014. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7D3-08140

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.