PartsTable
Technical Data Sheet
Download PDF

7D222440 — BEARING,ROLLER,NEEDLE

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

7D222440: BEARING,ROLLER,NEEDLE.

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_diameter: 0.5616 INCHES MINIMUM AND 0.5620 INCHES MAXIMUM IN, overall_width: 0.6150 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN, alignment_type: RIGID, surface_finish: GROUND, special_features: EXTRA CAPACITY OUTER RING. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-883-5413, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7D222440
NSN: 3110-00-883-5413
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 23382 — FWD SEAGRAVE HOLDINGS LP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_diameter0.5616 INCHES MINIMUM AND 0.5620 INCHES MAXIMUM IN
overall_width0.6150 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN
alignment_typeRIGID
surface_finishGROUND
special_featuresEXTRA CAPACITY OUTER RING
style_designatorNON-SEPARABLE, OPEN END, DRAWN SHELL
overall_outside_diameter0.7496 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN
retainer_fabrication_methodPRESSED
NSN3110-00-883-5413
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 7D222440 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: NON-SEPARABLE, OPEN END, DRAWN SHELL
•
OVERALL OUTSIDE DIAMETER: 0.7496 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN
•
ALIGNMENT TYPE: RIGID
•
BORE DIAMETER: 0.5616 INCHES MINIMUM AND 0.5620 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODPRESSED
SURFACE FINISHGROUND
STYLE DESIGNATORNON-SEPARABLE, OPEN END, DRAWN SHELL
OVERALL WIDTH0.6150 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER0.7496 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN
ALIGNMENT TYPERIGID
SPECIAL FEATURESEXTRA CAPACITY OUTER RING
BORE DIAMETER0.5616 INCHES MINIMUM AND 0.5620 INCHES MAXIMUM IN
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
33730Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 7D222440?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7D222440?
7D222440 is a BEARING,ROLLER,NEEDLE.
What parts can replace 7D222440?
There is 1 known substitute for 7D222440: 33730. Substitute compatibility should be verified for your specific system.
What is the NSN for 7D222440?
7D222440 is cataloged in the U.S. Government catalog under NSN 3110-00-883-5413. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7D222440