The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.630 INCHES NOMINAL IN, material: STEEL CORROSION RESISTING BAND, lug_width: 1.290 INCHES NOMINAL IN, overall_width: 0.698 INCHES NOMINAL IN, special_features: THIS CLAMP-HINGED,QUICK RELEASE TWO MOUNTING HOLES HAS A STUD AND SPRING ASSY, style_designator: CLAMP & BRACKET. This part is cataloged in the U.S.
Government catalog under NSN 5340-01-370-9273, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
7C34-8-2A
NSN:5340-01-370-9273 FSC:5340 — Hardware, Commercial CAGE:71286 — HOWMET GLOBAL FASTENING SYSTEMS INC DIV CAMLOC PRODUCTS (USA)
SPECIFICATIONS
diameter
0.630 INCHES NOMINAL IN
material
STEEL CORROSION RESISTING BAND
lug_width
1.290 INCHES NOMINAL IN
overall_width
0.698 INCHES NOMINAL IN
special_features
THIS CLAMP-HINGED,QUICK RELEASE TWO MOUNTING HOLES HAS A STUD AND SPRING ASSY
style_designator
CLAMP & BRACKET
tongue_hole_type
ROUND, UNTHREADED
features_provided
LUG
lug_hole_diameter
0.300 INCHES MINIMUM AND 0.340 INCHES MAXIMUM IN
surface_treatment
PASSIVATE BAND
loop_inside_diameter
0.500 INCHES NOMINAL IN
fastening_device_type
WING HEAD SCREW
NSN
5340-01-370-9273
COMPONENT DIAGRAM
KEY FEATURES
•
LUG HOLE DIAMETER: 0.300 INCHES MINIMUM AND 0.340 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE BAND
•
FASTENING DEVICE TYPE: WING HEAD SCREW
•
STYLE DESIGNATOR: CLAMP & BRACKET
•
DIAMETER: 0.630 INCHES NOMINAL IN
•
FEATURES PROVIDED: LUG
•
LUG WIDTH: 1.290 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
LUG HOLE DIAMETER
0.300 INCHES MINIMUM AND 0.340 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
MIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE BAND
FASTENING DEVICE TYPE
WING HEAD SCREW
STYLE DESIGNATOR
CLAMP & BRACKET
DIAMETER
0.630 INCHES NOMINAL IN
OVERALL WIDTH
0.698 INCHES NOMINAL IN
FEATURES PROVIDED
LUG
LUG WIDTH
1.290 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END
1.050 INCHES NOMINAL IN
SPECIAL FEATURES
THIS CLAMP-HINGED,QUICK RELEASE TWO MOUNTING HOLES HAS A STUD AND SPRING ASSY
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7C34-8-2A?
7C34-8-2A is a CLAMP,LOOP.
What parts can replace 7C34-8-2A?
There is 1 known substitute for 7C34-8-2A: ST9M427W8. Substitute compatibility should be verified for your specific system.
What is the NSN for 7C34-8-2A?
7C34-8-2A is cataloged in the U.S. Government catalog under NSN 5340-01-370-9273. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.