PartsTable
Technical Data Sheet
Download PDF

7A50167 — SEAT,BEARING

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

7A50167: SEAT,BEARING.

The SEAT,BEARING is a the manufacturer industrial component. Key specifications include material: STEEL FACE, bore_diameter: 1.900 INCHES NOMINAL IN, overall_width: 0.140 INCHES NOMINAL IN, outside_diameter: 3.125 INCHES NOMINAL IN, style_designator: FLAT RACE SURFACE, end_item_identification: SWING STSTOR GRP,LH W/SHIPS SPTS. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-649-3519, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7A50167
NSN: 3110-01-649-3519
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 60587 — FEDERAL EQUIPMENT CO (USA)
SPECIFICATIONS
materialSTEEL FACE
bore_diameter1.900 INCHES NOMINAL IN
overall_width0.140 INCHES NOMINAL IN
outside_diameter3.125 INCHES NOMINAL IN
style_designatorFLAT RACE SURFACE
end_item_identificationSWING STSTOR GRP,LH W/SHIPS SPTS
part_name_assigned_by_controlling_agencyBEARING RETAINER
NSN3110-01-649-3519
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 7A50167 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: FLAT RACE SURFACE
•
OUTSIDE DIAMETER: 3.125 INCHES NOMINAL IN
•
BORE DIAMETER: 1.900 INCHES NOMINAL IN
•
MATERIAL: STEEL FACE
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORFLAT RACE SURFACE
OVERALL WIDTH0.140 INCHES NOMINAL IN
OUTSIDE DIAMETER3.125 INCHES NOMINAL IN
PART NAME ASSIGNED BY CONTROLLING AGENCYBEARING RETAINER
END ITEM IDENTIFICATIONSWING STSTOR GRP,LH W/SHIPS SPTS
BORE DIAMETER1.900 INCHES NOMINAL IN
MATERIALSTEEL FACE
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES 2
7A50106 REV L.1 FIND NO 3.1Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
7A50103 REV L.1 FIND NO 3.1Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 7A50167?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7A50167?
7A50167 is a SEAT,BEARING.
What parts can replace 7A50167?
There are 2 known substitutes for 7A50167: 7A50106 REV L.1 FIND NO 3.1, 7A50103 REV L.1 FIND NO 3.1. Substitute compatibility should be verified for your specific system.
What is the NSN for 7A50167?
7A50167 is cataloged in the U.S. Government catalog under NSN 3110-01-649-3519. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7A50167