PartsTable
Technical Data Sheet
Download PDF

7A40098 — BRACKET,MOUNTING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

7A40098: BRACKET,MOUNTING.

The BRACKET,MOUNTING is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING, overall_width: 3.140 INCHES NOMINAL IN, overall_height: 1.750 INCHES NOMINAL IN, overall_length: 3.380 INCHES NOMINAL IN, end_item_identification: OVERSIZED WHEEL SLIDE ASSEMBLY, part_name_assigned_by_controlling_agency: OVERSPEED BEARING BLOCK. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-645-5738, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7A40098
NSN: 5340-01-645-5738
FSC: 5340 — Hardware, Commercial
CAGE: 60587 — FEDERAL EQUIPMENT CO (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING
overall_width3.140 INCHES NOMINAL IN
overall_height1.750 INCHES NOMINAL IN
overall_length3.380 INCHES NOMINAL IN
end_item_identificationOVERSIZED WHEEL SLIDE ASSEMBLY
part_name_assigned_by_controlling_agencyOVERSPEED BEARING BLOCK
NSN5340-01-645-5738
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7A40098 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL CORROSION RESISTING
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT1.750 INCHES NOMINAL IN
OVERALL LENGTH3.380 INCHES NOMINAL IN
OVERALL WIDTH3.140 INCHES NOMINAL IN
PART NAME ASSIGNED BY CONTROLLING AGENCYOVERSPEED BEARING BLOCK
END ITEM IDENTIFICATIONOVERSIZED WHEEL SLIDE ASSEMBLY
MATERIALSTEEL CORROSION RESISTING
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 2
7A40027 REV D FIND NO 3Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
7A0098Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 7A40098?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7A40098?
7A40098 is a BRACKET,MOUNTING.
What parts can replace 7A40098?
There are 2 known substitutes for 7A40098: 7A40027 REV D FIND NO 3, 7A0098. Substitute compatibility should be verified for your specific system.
What is the NSN for 7A40098?
7A40098 is cataloged in the U.S. Government catalog under NSN 5340-01-645-5738. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7A40098