PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 79932-1
79932-1 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The STABILIZING BAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: PLAIN, OCTAGON, nut_height: 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN, thread_class: 3B, thread_series: UN, thread_direction: RIGHT-HAND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-275-0703, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
79932-1
NSN: 5310-00-275-0703
FSC: 5310
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_stylePLAIN, OCTAGON
nut_height0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
thread_class3B
thread_seriesUN
thread_directionRIGHT-HAND
features_providedCASEHARDENED
width_across_flats3.802 INCHES MINIMUM AND 3.822 INCHES MAXIMUM IN
nominal_thread_size2.625 INCHES IN
bearing_surface_typeCHAMFERED
drilled_hole_diameter0.257 INCHES NOMINAL IN
hole_type_and_quantity1 DRILLED
NSN5310-00-275-0703
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 79932-1 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NUT STYLE: PLAIN, OCTAGON
•
FEATURES PROVIDED: CASEHARDENED
•
HOLE CONFIGURATION STYLE: CONFIGURATION H
•
THREAD SERIES: UN
•
BEARING SURFACE TYPE: CHAMFERED
•
THREAD QUANTITY PER INCH: 16
•
NOMINAL THREAD SIZE: 2.625 INCHES IN
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS (FLIS)
NUT STYLEPLAIN, OCTAGON
FEATURES PROVIDEDCASEHARDENED
HOLE CONFIGURATION STYLECONFIGURATION H
THREAD SERIESUN
BEARING SURFACE TYPECHAMFERED
THREAD QUANTITY PER INCH16
NOMINAL THREAD SIZE2.625 INCHES IN
THREAD DIRECTIONRIGHT-HAND
MATERIALSTEEL OVERALL
HOLE TYPE AND QUANTITY1 DRILLED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
51566Interchangeable
interchangeable cross-reference
interchangeable
65600-192Interchangeable
interchangeable cross-reference
interchangeable
70550-192Interchangeable
interchangeable cross-reference
interchangeable
79932-1Interchangeable
interchangeable cross-reference
interchangeable
031-1Interchangeable
interchangeable cross-reference
interchangeable
611982Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 79932-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 79932-1?
79932-1 is a STABILIZING BAR.
What parts can replace 79932-1?
There are 15 known substitutes for 79932-1: 51566, 65600-192, 70550-192 and 12 more. Substitute compatibility should be verified for your specific system.
Is 79932-1 still available?
79932-1 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 79932-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026