PartsTable
Technical Data Sheet
Download PDF

7985941 — PAD,CUSHIONING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

7985941: PAD,CUSHIONING.

The PAD,CUSHIONING is a the manufacturer industrial component. Key specifications include width: 1.500 INCHES NOMINAL IN, length: 2.000 INCHES NOMINAL IN, material: RUBBER CUSHIONING, thickness: 0.844 INCHES MINIMUM AND 0.906 INCHES MAXIMUM IN, special_features: ONE END BEVELED 0.375 IN. AT A 45DEG.

ANGLE ALONG WIDTH IN. This part is cataloged in the U.S. Government catalog under NSN 5340-01-071-9737, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7985941
NSN: 5340-01-071-9737
FSC: 5340 — Hardware, Commercial
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
width1.500 INCHES NOMINAL IN
length2.000 INCHES NOMINAL IN
materialRUBBER CUSHIONING
thickness0.844 INCHES MINIMUM AND 0.906 INCHES MAXIMUM IN
special_featuresONE END BEVELED 0.375 IN. AT A 45DEG. ANGLE ALONG WIDTH IN
NSN5340-01-071-9737
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7985941 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 2.000 INCHES NOMINAL IN
•
WIDTH: 1.500 INCHES NOMINAL IN
•
MATERIAL: RUBBER CUSHIONING
•
THICKNESS: 0.844 INCHES MINIMUM AND 0.906 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
LENGTH2.000 INCHES NOMINAL IN
SPECIAL FEATURESONE END BEVELED 0.375 IN. AT A 45DEG. ANGLE ALONG WIDTH IN
WIDTH1.500 INCHES NOMINAL IN
MATERIALRUBBER CUSHIONING
THICKNESS0.844 INCHES MINIMUM AND 0.906 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 7985941?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7985941?
7985941 is a PAD,CUSHIONING.
What is the NSN for 7985941?
7985941 is cataloged in the U.S. Government catalog under NSN 5340-01-071-9737. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7985941