Name: SEPARATOR,WATER,AIRCRAFT AIR CON
Brand: Zebra
SKU: 79842

79842 ✓ Verified by PartsTable

Zebra · MRO · MRO_GENERAL

WHAT YOU NEED TO KNOW

SAS cables have specific lane counts: 4i (internal) or 4e (external) Cable length matters — too short won't reach, too long creates clutter

Verify connector type on BOTH ends — many SAS cables are asymmetric

PRODUCT OVERVIEW

Zebra's replacement parts and printheads are quality components made to Zebra's exacting engineering standards. These cost-effective components ensure that your printer will continue to provide the quality, reliability, and performance you expect. Quality Stamped from the same tools and dies as the originals, Zebra replacement parts and printheads are thoroughly inspected to ensure that they fit just as precisely as the originals. They are made from the same high-quality materials to provide superior performance and protection against wear.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5999-00-794-4983, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS

MRO→ MRO_GENERAL→ 79842

NSN: 5999-00-794-4983
FSC: 5999
CAGE: 07700 — TECHNICAL WIRE PRODUCTS, LLC DBA TWP (USA)

SPECIFICATIONS

minor_height	0.188 INCHES MINIMUM AND 0.204 INCHES MAXIMUM IN
hole_diameter	0.229 INCHES MINIMUM AND 0.239 INCHES MAXIMUM IN
overall_width	6.990 INCHES NOMINAL IN
aperture_width	5.188 INCHES MINIMUM AND 6.010 INCHES MAXIMUM IN
overall_length	8.740 INCHES NOMINAL IN
aperture_length	6.938 INCHES MINIMUM AND 7.847 INCHES MAXIMUM IN
special_features	TWO THREADED HOLES 4-40 NC-2A DIAGONALLY SPACED ON 6.250 IN. BY 5.500 IN. MOUNTING CENTERS A
style_designator	NON-CIRCULAR
bolt_hole_quantity	12
cross-sectional_shape_style	MESH AND METAL
outside_edge_to_bolt_hole_center_distance_along_width	0.370 INCHES NOMINAL IN
outside_edge_to_bolt_hole_center_distance_along_length	0.370 INCHES NOMINAL IN
NSN	5999-00-794-4983

COMPONENT DIAGRAM

KEY FEATURES

•

MINOR HEIGHT: 0.188 INCHES MINIMUM AND 0.204 INCHES MAXIMUM IN

•

CROSS-SECTIONAL SHAPE STYLE: MESH AND METAL

•

OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH: 0.370 INCHES NOMINAL IN

•

CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH: 2.080 INCHES NOMINAL IN

•

HOLE DIAMETER: 0.229 INCHES MINIMUM AND 0.239 INCHES MAXIMUM IN

•

APERTURE LENGTH: 6.938 INCHES MINIMUM AND 7.847 INCHES MAXIMUM IN

•

BOLT HOLE QUANTITY: 12

TECHNICAL CHARACTERISTICS (FLIS)

MINOR HEIGHT	0.188 INCHES MINIMUM AND 0.204 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLE	MESH AND METAL
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH	0.370 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH	2.080 INCHES NOMINAL IN
OVERALL WIDTH	6.990 INCHES NOMINAL IN
HOLE DIAMETER	0.229 INCHES MINIMUM AND 0.239 INCHES MAXIMUM IN
APERTURE LENGTH	6.938 INCHES MINIMUM AND 7.847 INCHES MAXIMUM IN
BOLT HOLE QUANTITY	12
APERTURE WIDTH	5.188 INCHES MINIMUM AND 6.010 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH	2.080 INCHES NOMINAL IN

VERIFIED SUBSTITUTES & CROSS-REFERENCES 9

327019Interchangeable