PartsTable
Technical Data Sheet
Download PDF

7973646 — PIN,SHOULDER,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

7973646: PIN,SHOULDER,HEADLESS.

The PIN,SHOULDER,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4140 OR STEEL COMP 8645 OR STEEL COMP 8745 OVERALL, shank_length: 1.250 INCHES NOMINAL IN, thread_length: 1.188 INCHES NOMINAL IN, overall_length: 3.250 INCHES NOMINAL IN, shank_diameter: 0.216 INCHES NOMINAL IN, surface_finish: 32.0 MICROINCHES SHANK END. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-333-0460, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7973646
NSN: 5315-00-333-0460
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialSTEEL COMP 4140 OR STEEL COMP 8645 OR STEEL COMP 8745 OVERALL
shank_length1.250 INCHES NOMINAL IN
thread_class2
thread_length1.188 INCHES NOMINAL IN
overall_length3.250 INCHES NOMINAL IN
shank_diameter0.216 INCHES NOMINAL IN
surface_finish32.0 MICROINCHES SHANK END
first_end_styleCHAMFERED
second_end_styleSQUARE
style_designatorSHOULDER
thread_directionRIGHT-HAND
shoulder_diameter0.275 INCHES MINIMUM AND 0.280 INCHES MAXIMUM IN
NSN5315-00-333-0460
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 7973646 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.216 INCHES NOMINAL IN
•
SURFACE FINISH: 32.0 MICROINCHES SHANK END
•
FIRST END TAPER LENGTH: 0.031 INCHES NOMINAL IN
•
FIRST END LOCATION: THREADED END
•
THREAD LENGTH: 1.188 INCHES NOMINAL IN
•
FIRST END STYLE: CHAMFERED
•
SHANK LENGTH: 1.250 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SHOULDER
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.216 INCHES NOMINAL IN
SURFACE FINISH32.0 MICROINCHES SHANK END
FIRST END TAPER LENGTH0.031 INCHES NOMINAL IN
FIRST END LOCATIONTHREADED END
THREAD LENGTH1.188 INCHES NOMINAL IN
FIRST END STYLECHAMFERED
SHANK LENGTH1.250 INCHES NOMINAL IN
STYLE DESIGNATORSHOULDER
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-624 FED SPEC ALL MATERIAL RESPONSES OVERALL
OVERALL LENGTH3.250 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 2
SA8Reference document
Same NSN cross-reference
Reference document — Secondary reference
5315003330460Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 7973646?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7973646?
7973646 is a PIN,SHOULDER,HEADLESS.
What parts can replace 7973646?
There are 2 known substitutes for 7973646: SA8, 5315003330460. Substitute compatibility should be verified for your specific system.
What is the NSN for 7973646?
7973646 is cataloged in the U.S. Government catalog under NSN 5315-00-333-0460. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7973646