PartsTable
Technical Data Sheet
Download PDF

7971262 — SCREW,ASSEMBLED WASHER

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

7971262: SCREW,ASSEMBLED WASHER.

The SCREW,ASSEMBLED WASHER is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: PAN NO. 2, head_height: 0.085 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.306 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN, thread_length: 0.355 INCHES MINIMUM IN.

This part is cataloged in the U.S. Government catalog under NSN 5305-00-879-5904, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7971262
NSN: 5305-00-879-5904
FSC: 5305 — Screws
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
materialSTEEL OVERALL
head_stylePAN NO. 2
head_height0.085 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.306 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
thread_length0.355 INCHES MINIMUM IN
fastener_length0.375 INCHES NOMINAL IN
washer_quantity1
thread_directionRIGHT-HAND
surface_treatmentCADMIUM OVERALL
internal_drive_styleSLOT
primary_washer_styleFLAT EXTERNAL TEETH
NSN5305-00-879-5904
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 7971262 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.085 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.375 INCHES NOMINAL IN
•
PRIMARY WASHER OUTSIDE DIAMETER: 0.322 INCHES NOMINAL IN
•
THREAD LENGTH: 0.355 INCHES MINIMUM IN
•
NOMINAL THREAD DIAMETER: 0.164 INCHES IN
•
HEAD STYLE: PAN NO. 2
•
PRIMARY WASHER STYLE: FLAT EXTERNAL TEETH
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.085 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN
FASTENER LENGTH0.375 INCHES NOMINAL IN
PRIMARY WASHER OUTSIDE DIAMETER0.322 INCHES NOMINAL IN
THREAD LENGTH0.355 INCHES MINIMUM IN
NOMINAL THREAD DIAMETER0.164 INCHES IN
HEAD STYLEPAN NO. 2
PRIMARY WASHER STYLEFLAT EXTERNAL TEETH
THREAD DIRECTIONRIGHT-HAND
PRIMARY WASHER MATERIAL THICKNESS0.020 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM OVERALL
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016 5305-00-001-9160 5305-00-001-9629 5305-00-001-9742 5305-00-001-9768 5305-00-003-4306 5305-00-003-6694 5305-00-003-6753
SUBSTITUTES & CROSS-REFERENCES 1
SEMSTYPE1Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 7971262?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7971262?
7971262 is a SCREW,ASSEMBLED WASHER.
What parts can replace 7971262?
There is 1 known substitute for 7971262: SEMSTYPE1. Substitute compatibility should be verified for your specific system.
What is the NSN for 7971262?
7971262 is cataloged in the U.S. Government catalog under NSN 5305-00-879-5904. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7971262