PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 7969J
7969J ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: PAPER AND GLUE OVERALL, hole_diameter: 0.219 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, outside_diameter: 3.250 INCHES NOMINAL IN, bolt_circle_diameter: 2.781 INCHES NOMINAL IN, cross-sectional_thickness: 0.021 INCHES NOMINAL IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-362-3269, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7969J
NSN: 5330-00-362-3269
FSC: 5330
CAGE: 56442 — DIAMOND REO TRUCK CO (USA)
SPECIFICATIONS
materialPAPER AND GLUE OVERALL
hole_diameter0.219 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
outside_diameter3.250 INCHES NOMINAL IN
bolt_circle_diameter2.781 INCHES NOMINAL IN
cross-sectional_thickness0.021 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classificationMIL-G-12803,NO. +3313-B MIL SPEC ALL MATERIAL RESPONSES OVERALL
NSN5330-00-362-3269
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7969J MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 3.250 INCHES NOMINAL IN
•
BOLT CIRCLE DIAMETER: 2.781 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-12803,NO. +3313-B MIL SPEC ALL MATERIAL RESPONSES OVERALL
•
HOLE DIAMETER: 0.219 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
CROSS-SECTIONAL THICKNESS: 0.021 INCHES NOMINAL IN
•
MATERIAL: PAPER AND GLUE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER3.250 INCHES NOMINAL IN
BOLT CIRCLE DIAMETER2.781 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-12803,NO. +3313-B MIL SPEC ALL MATERIAL RESPONSES OVERALL
HOLE DIAMETER0.219 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
CROSS-SECTIONAL THICKNESS0.021 INCHES NOMINAL IN
MATERIALPAPER AND GLUE OVERALL
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
170Interchangeable
interchangeable cross-reference
interchangeable
35000Interchangeable
interchangeable cross-reference
interchangeable
K50Interchangeable
interchangeable cross-reference
interchangeable
9835413-10Interchangeable
interchangeable cross-reference
interchangeable
KC-67F100-116Interchangeable
interchangeable cross-reference
interchangeable
K9Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 7969J?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7969J?
7969J is a GASKET.
What parts can replace 7969J?
There are 12 known substitutes for 7969J: 170, 35000, K50 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 7969J?
7969J is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-362-3269. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7969J

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026