PartsTable
Technical Data Sheet
Download PDF

7962133 — PIN,GROOVED,HEADED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

7962133: PIN,GROOVED,HEADED.

The PIN,GROOVED,HEADED is a the manufacturer industrial component. Key specifications include height: 0.092 INCHES MINIMUM AND 0.165 INCHES MAXIMUM IN, diameter: 0.307 INCHES MINIMUM AND 0.311 INCHES MAXIMUM IN, material: STEEL COMP 1010 OR STEEL COMP 1015 OR STEEL COMP 1018 OR STEEL COMP 1020 OVERALL, head_style: FLAT CHAMFER, undercut_width: 0.075 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN, first_end_style: CHAMFERED. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-796-2133, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7962133
NSN: 5315-00-796-2133
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
height0.092 INCHES MINIMUM AND 0.165 INCHES MAXIMUM IN
diameter0.307 INCHES MINIMUM AND 0.311 INCHES MAXIMUM IN
materialSTEEL COMP 1010 OR STEEL COMP 1015 OR STEEL COMP 1018 OR STEEL COMP 1020 OVERALL
head_styleFLAT CHAMFER
undercut_width0.075 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
first_end_styleCHAMFERED
effective_length1.130 INCHES MINIMUM AND 1.430 INCHES MAXIMUM IN
style_designatorGROOVE
pin_head_diameter0.422 INCHES MINIMUM AND 0.454 INCHES MAXIMUM IN
surface_treatmentCADMIUM AND CHROMATE OR ZINC AND CHROMATE OVERALL
under_head_length1.422 INCHES MINIMUM AND 1.454 INCHES MAXIMUM IN
undercut_diameter0.177 INCHES MINIMUM AND 0.182 INCHES MAXIMUM IN
NSN5315-00-796-2133
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 7962133 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
UNDERCUT WIDTH: 0.075 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
•
FIRST END TAPER LENGTH: 0.015 INCHES MINIMUM AND 0.047 INCHES MAXIMUM IN
•
UNDERCUT DIAMETER: 0.177 INCHES MINIMUM AND 0.182 INCHES MAXIMUM IN
•
UNDER HEAD LENGTH: 1.422 INCHES MINIMUM AND 1.454 INCHES MAXIMUM IN
•
FIRST END STYLE: CHAMFERED
•
STYLE DESIGNATOR: GROOVE
•
PIN HEAD DIAMETER: 0.422 INCHES MINIMUM AND 0.454 INCHES MAXIMUM IN
•
DIAMETER: 0.307 INCHES MINIMUM AND 0.311 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
UNDERCUT WIDTH0.075 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
FIRST END TAPER LENGTH0.015 INCHES MINIMUM AND 0.047 INCHES MAXIMUM IN
UNDERCUT DIAMETER0.177 INCHES MINIMUM AND 0.182 INCHES MAXIMUM IN
UNDER HEAD LENGTH1.422 INCHES MINIMUM AND 1.454 INCHES MAXIMUM IN
FIRST END STYLECHAMFERED
STYLE DESIGNATORGROOVE
PIN HEAD DIAMETER0.422 INCHES MINIMUM AND 0.454 INCHES MAXIMUM IN
DIAMETER0.307 INCHES MINIMUM AND 0.311 INCHES MAXIMUM IN
FIRST END TAPER ANGLE43.0 DEGREES MINIMUM AND 47.0 DEGREES MAXIMUM
EFFECTIVE LENGTH1.130 INCHES MINIMUM AND 1.430 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES 1
5310007962133Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 7962133?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7962133?
7962133 is a PIN,GROOVED,HEADED.
What parts can replace 7962133?
There is 1 known substitute for 7962133: 5310007962133. Substitute compatibility should be verified for your specific system.
What is the NSN for 7962133?
7962133 is cataloged in the U.S. Government catalog under NSN 5315-00-796-2133. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7962133

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.