PartsTable / COMPONENT / 79563
79563 — Technical Data Sheet
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The CYLINDER SLEEVE is a the manufacturer industrial component. Key specifications include height: 0.344 INCHES NOMINAL IN, material: COPPER ALLOY, outside_diameter: 0.918 INCHES MINIMUM AND 0.922 INCHES MAXIMUM IN, special_features: 2 DEG TAPER IN SIDEWALL, style_designator: CUP, material_thickness: 0.031 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-274-5230, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
79563
NSN: 5340-00-274-5230 FSC: 5340 CAGE: 00198 — PRATT & WHITNEY CANADA CORP DIV PRATT & WHITNEY CANADA CORP. (CAN)
SPECIFICATIONS
height 0.344 INCHES NOMINAL IN material COPPER ALLOY outside_diameter 0.918 INCHES MINIMUM AND 0.922 INCHES MAXIMUM IN special_features 2 DEG TAPER IN SIDEWALL style_designator CUP material_thickness 0.031 INCHES NOMINAL IN material_document_and_classification AMS 4505 ASSN STD SINGLE MATERIAL RESPONSE NSN 5340-00-274-5230
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 79563
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• MATERIAL THICKNESS: 0.031 INCHES NOMINAL IN
• MATERIAL DOCUMENT AND CLASSIFICATION: AMS 4505 ASSN STD SINGLE MATERIAL RESPONSE
• OUTSIDE DIAMETER: 0.918 INCHES MINIMUM AND 0.922 INCHES MAXIMUM IN
• HEIGHT: 0.344 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATOR CUP MATERIAL THICKNESS 0.031 INCHES NOMINAL IN MATERIAL DOCUMENT AND CLASSIFICATION AMS 4505 ASSN STD SINGLE MATERIAL RESPONSE MATERIAL COPPER ALLOY SPECIAL FEATURES 2 DEG TAPER IN SIDEWALL OUTSIDE DIAMETER 0.918 INCHES MINIMUM AND 0.922 INCHES MAXIMUM IN HEIGHT 0.344 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
EW57850 Interchangeable interchangeable cross-reference
interchangeable
172-152 Interchangeable interchangeable cross-reference
interchangeable
WC-57850 Interchangeable interchangeable cross-reference
interchangeable
355-2 Interchangeable interchangeable cross-reference
interchangeable
817094 Interchangeable interchangeable cross-reference
interchangeable
N219042 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 79563?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 79563?
79563 is a CYLINDER SLEEVE.
What parts can replace 79563?
There are 12 known substitutes for 79563: EW57850, 172-152, WC-57850 and 9 more. Substitute compatibility should be verified for your specific system.
Is 79563 still available?
79563 is currently cancelled.