PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 7954629
7954629 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: PAPER AND GLUE AND GLYCERIN OVERALL, hole_diameter: 0.098 INCHES MINIMUM AND 0.166 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 1.562 INCHES NOMINAL IN, overall_length: 2.935 INCHES MINIMUM AND 2.939 INCHES MAXIMUM IN, outside_corner_radius: 0.156 INCHES NOMINAL IN, cross-sectional_thickness: 0.031 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-364-7004, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7954629
NSN: 5330-00-364-7004
FSC: 5330
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialPAPER AND GLUE AND GLYCERIN OVERALL
hole_diameter0.098 INCHES MINIMUM AND 0.166 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
overall_width1.562 INCHES NOMINAL IN
overall_length2.935 INCHES MINIMUM AND 2.939 INCHES MAXIMUM IN
outside_corner_radius0.156 INCHES NOMINAL IN
cross-sectional_thickness0.031 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classificationHH-P-96 FED SPEC ALL MATERIAL RESPONSES OVERALL
center_to_center_distance_between_bolt_holes_along_length2.623 INCHES MINIMUM AND 2.627 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
NSN5330-00-364-7004
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7954629 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
MATERIAL DOCUMENT AND CLASSIFICATION: HH-P-96 FED SPEC ALL MATERIAL RESPONSES OVERALL
•
HOLE DIAMETER: 0.098 INCHES MINIMUM AND 0.166 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
•
CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
•
MATERIAL: PAPER AND GLUE AND GLYCERIN OVERALL
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 2.623 INCHES MINIMUM AND 2.627 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
MATERIAL DOCUMENT AND CLASSIFICATIONHH-P-96 FED SPEC ALL MATERIAL RESPONSES OVERALL
OVERALL WIDTH1.562 INCHES NOMINAL IN
HOLE DIAMETER0.098 INCHES MINIMUM AND 0.166 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
OVERALL LENGTH2.935 INCHES MINIMUM AND 2.939 INCHES MAXIMUM IN
CROSS-SECTIONAL THICKNESS0.031 INCHES NOMINAL IN
MATERIALPAPER AND GLUE AND GLYCERIN OVERALL
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH2.623 INCHES MINIMUM AND 2.627 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
OUTSIDE CORNER RADIUS0.156 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
25380-7Interchangeable
interchangeable cross-reference
interchangeable
25380Interchangeable
interchangeable cross-reference
interchangeable
A-11462Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 7954629?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7954629?
7954629 is a GASKET.
What parts can replace 7954629?
There are 3 known substitutes for 7954629: 25380-7, 25380, A-11462. Substitute compatibility should be verified for your specific system.
Is 7954629 still available?
7954629 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7954629

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026