PartsTable
Technical Data Sheet
Download PDF

7951215 — SCREW,ASSEMBLED WASHER

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

7951215: SCREW,ASSEMBLED WASHER.

The SCREW,ASSEMBLED WASHER is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: PAN NO. 2, head_height: 0.085 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.306 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN, thread_length: 0.250 INCHES MINIMUM IN.

This part is cataloged in the U.S. Government catalog under NSN 5305-00-573-4638, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7951215
NSN: 5305-00-573-4638
FSC: 5305 — Screws
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialSTEEL OVERALL
head_stylePAN NO. 2
head_height0.085 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.306 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
thread_length0.250 INCHES MINIMUM IN
fastener_length0.312 INCHES NOMINAL IN
washer_quantity1
thread_directionRIGHT-HAND
surface_treatmentCADMIUM OVERALL
internal_drive_styleSLOT
primary_washer_styleFLAT
NSN5305-00-573-4638
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 7951215 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.085 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.312 INCHES NOMINAL IN
•
PRIMARY WASHER OUTSIDE DIAMETER: 0.306 INCHES MINIMUM AND 0.317 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.250 INCHES MINIMUM IN
•
NOMINAL THREAD DIAMETER: 0.164 INCHES IN
•
HEAD STYLE: PAN NO. 2
•
PRIMARY WASHER STYLE: FLAT
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.085 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN
FASTENER LENGTH0.312 INCHES NOMINAL IN
PRIMARY WASHER OUTSIDE DIAMETER0.306 INCHES MINIMUM AND 0.317 INCHES MAXIMUM IN
THREAD LENGTH0.250 INCHES MINIMUM IN
NOMINAL THREAD DIAMETER0.164 INCHES IN
HEAD STYLEPAN NO. 2
PRIMARY WASHER STYLEFLAT
THREAD DIRECTIONRIGHT-HAND
PRIMARY WASHER MATERIAL THICKNESS0.020 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM OVERALL
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES 1
5305005734638Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 7951215?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7951215?
7951215 is a SCREW,ASSEMBLED WASHER.
What parts can replace 7951215?
There is 1 known substitute for 7951215: 5305005734638. Substitute compatibility should be verified for your specific system.
What is the NSN for 7951215?
7951215 is cataloged in the U.S. Government catalog under NSN 5305-00-573-4638. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7951215