PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 79469
79469 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The CLAMP,MACHINE,HOLD DOWN is a the manufacturer industrial component. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-429-3453, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
79469
NSN: 5310-00-429-3453
FSC: 5310
CAGE: 35510 — PRESTOLITE ELECTRIC INC (USA)
SPECIFICATIONS
functional_descriptionU-CLAMP,10 IN. LG.; 2 3/4 IN. WD.; 1 1/4 IN. THK.; SLOT,15/16 IN. WD.; 9 IN. LG.; FINGER,15/16 IN. DIA.; 15/16 IN. LG.; WT. 5.78 LBS. LBS
NSN5310-00-429-3453
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 79469 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE SHAPE STYLE: ROUND
•
HOLE DIAMETER: 0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM IN
•
PERIPHERAL SHAPE STYLE: ROUND
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
THICKNESS: 0.030 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
•
OVERALL DIAMETER: 0.463 INCHES MINIMUM AND 0.473 INCHES MAXIMUM IN
•
SURFACE TREATMENT: CADMIUM OVERALL
•
MATERIAL: STEEL COMP 1010 OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE SHAPE STYLEROUND
HOLE DIAMETER0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM IN
PERIPHERAL SHAPE STYLEROUND
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
THICKNESS0.030 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
OVERALL DIAMETER0.463 INCHES MINIMUM AND 0.473 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM OVERALL
MATERIALSTEEL COMP 1010 OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 1, CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
4716-00Interchangeable
interchangeable cross-reference
interchangeable
N75451AFInterchangeable
interchangeable cross-reference
interchangeable
SNJ55451BJG-00Interchangeable
interchangeable cross-reference
interchangeable
75451Interchangeable
interchangeable cross-reference
interchangeable
79-469Interchangeable
interchangeable cross-reference
interchangeable
Z118 075451Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 79469?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 79469?
79469 is a CLAMP,MACHINE,HOLD DOWN.
What parts can replace 79469?
There are 8 known substitutes for 79469: 4716-00, N75451AF, SNJ55451BJG-00 and 5 more. Substitute compatibility should be verified for your specific system.
Is 79469 still available?
79469 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 79469

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026