PartsTable
Technical Data Sheet
Download PDF

79318CM-428 — NUT,SELF-LOCKING,EXTENDED WASHER

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

79318CM-428: NUT,SELF-LOCKING,EXTENDED WASHER.

NUT,SELF-LOCKING,EXTENDED WASHER. Key specifications include end_item_identification: KC-46 AIRCRAFT, reference_number_differentiating_characteristics: ITEM IS FAA CERTIFIED. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-116-1207, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
79318CM-428
NSN: 5310-01-116-1207
NIINs: 011161207, 016879456
FSC: 5310 — Nuts and Washers
CAGE: 56878 — SPS TECHNOLOGIES, LLC DBA PB FASTENERS (USA)
SPECIFICATIONS
end_item_identificationKC-46 AIRCRAFT
reference_number_differentiating_characteristicsITEM IS FAA CERTIFIED
NSN5310-01-116-1207
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 79318CM-428 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUBRICATION: DRY FILM LUBRICANT
•
WASHER OUTSIDE DIAMETER: 0.420 INCHES MAXIMUM IN
•
WIDTH ACROSS FLATS: 0.306 INCHES MINIMUM AND 0.316 INCHES MAXIMUM IN
•
THREAD SERIES: UNIFIED NATIONAL JOINT FINE (UNJF)
•
TEMP RATING: 450.0 FAHRENHEIT NOMINAL DEGF
•
WASHER THICKNESS: 0.020 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5737 NATIONAL SPEC ALL MATERIAL RESPONSES OR AMS5525 NATIONAL SPEC ALL MATERIAL RESPONSES OVERALL
TECHNICAL CHARACTERISTICS
LUBRICATIONDRY FILM LUBRICANT
OVERALL HEIGHT0.173 INCHES MINIMUM AND 0.203 INCHES MAXIMUM IN
WASHER OUTSIDE DIAMETER0.420 INCHES MAXIMUM IN
WIDTH ACROSS FLATS0.306 INCHES MINIMUM AND 0.316 INCHES MAXIMUM IN
THREAD SERIESUNIFIED NATIONAL JOINT FINE (UNJF)
TEMP RATING450.0 FAHRENHEIT NOMINAL DEGF
WASHER THICKNESS0.020 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS5737 NATIONAL SPEC ALL MATERIAL RESPONSES OR AMS5525 NATIONAL SPEC ALL MATERIAL RESPONSES OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.250 INCHES IN
SUBSTITUTES & CROSS-REFERENCES 7
BH788-4Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
MC15189Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
ST3M788-4Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
10109286Reference document
Same NSN cross-reference
Reference document — Informative reference only
E12589-4Reference document
Same NSN cross-reference
Reference document — Secondary reference
SLN206-3Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 79318CM-428?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 79318CM-428?
79318CM-428 is a NUT,SELF-LOCKING,EXTENDED WASHER.
What parts can replace 79318CM-428?
There are 7 known substitutes for 79318CM-428: BH788-4, MC15189, ST3M788-4 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 79318CM-428?
79318CM-428 is cataloged in the U.S. Government catalog under NSN 5310-01-116-1207. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 79318CM-428