PartsTable
Technical Data Sheet
Download PDF

79313 — FILTER

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

79313: FILTER.

The FILTER is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 2024 OUTER LAYER, hole_diameter: 0.1000 INCHES MINIMUM AND 0.1030 INCHES MAXIMUM FIRST IN, overall_width: 2.500 INCHES NOMINAL IN, overall_length: 0.2500 INCHES NOMINAL IN, shaft_material: STEEL, teeth_quantity: 14. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-474-4716, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 79313
NSN: 5330-00-474-4716
NIINs: 004744716, 010536660, 010611332, 011056888, 013620443, 014179503, 015271507, 016566909
FSC: 5330 — Packing and Gasket Materials
CAGE: 00198 — PRATT & WHITNEY CANADA CORP DIV PRATT & WHITNEY CANADA CORP. (CAN)
SPECIFICATIONS
materialALUMINUM ALLOY 2024 OUTER LAYER
hole_diameter0.1000 INCHES MINIMUM AND 0.1030 INCHES MAXIMUM FIRST IN
overall_width2.500 INCHES NOMINAL IN
overall_length0.2500 INCHES NOMINAL IN
shaft_materialSTEEL
teeth_quantity14
mounting_methodBRACKET(S)
pressure_rating400.000 POUNDS PER SQUARE INCH (PSI) MINIMUM AND 2000.000 POUNDS PER SQUARE INCH (PSI) MAXIMUM LBS
special_featuresTHREE FLATS OPPOSITE I.D.,TWO MOUNTING HOLES 1.555 IN. FROM CENTERLINE IN -5 ONLY IN
style_designatorHALF SLEEVE, PLAIN, NO OUTSIDE FLANGES
aperture_diameter1.562 INCHES NOMINAL IN
bolt_hole_quantity5
NSN5330-00-474-4716
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 79313 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.026 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
•
SIDE RADIUS FROM GASKET CENTER: 1.031 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NON-CIRCULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 3232 ASSN STD ALL MATERIAL RESPONSES OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
APERTURE DIAMETER: 1.562 INCHES NOMINAL IN
•
BOLT HOLE QUANTITY: 5
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.026 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
SIDE RADIUS FROM GASKET CENTER1.031 INCHES NOMINAL IN
STYLE DESIGNATORNON-CIRCULAR
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 3232 ASSN STD ALL MATERIAL RESPONSES OVERALL
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH2.500 INCHES NOMINAL IN
APERTURE DIAMETER1.562 INCHES NOMINAL IN
BOLT HOLE QUANTITY5
BOLT CIRCLE DIAMETER2.062 INCHES NOMINAL IN
OUTSIDE CORNER RADIUS0.219 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 79313?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 79313?
79313 is a FILTER. It is classified as a MRO (MRO_GENERAL).
What is the NSN for 79313?
79313 is cataloged in the U.S. Government catalog under NSN 5330-00-474-4716. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 79313

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.