PartsTable
Technical Data Sheet
Download PDF

7930K13 — BEARING UNIT,PLAIN

✓ Government record, cited
— · BALL BEARING
PRODUCT OVERVIEW

7930K13: BEARING UNIT,PLAIN.

The BEARING UNIT,PLAIN is a the manufacturer industrial component. Key specifications include material: STEEL HOUSING, base_length: 2.7500 INCHES NOMINAL IN, bore_diameter: 0.5000 INCHES NOMINAL IN, mounting_hole_type: ROUND, UNTHREADED, mounting_hole_diameter: 0.3125 INCHES NOMINAL IN, height_from_bottom_of_base_to_bore_centerline: 0.5600 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3130-01-135-4230, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7930K13
NSN: 3130-01-135-4230
FSC: 3130 — Bearings, Mounted
CAGE: 39428 — MCMASTER-CARR SUPPLY CO (USA)
SPECIFICATIONS
materialSTEEL HOUSING
base_length2.7500 INCHES NOMINAL IN
bore_diameter0.5000 INCHES NOMINAL IN
mounting_hole_typeROUND, UNTHREADED
mounting_hole_diameter0.3125 INCHES NOMINAL IN
height_from_bottom_of_base_to_bore_centerline0.5600 INCHES NOMINAL IN
center_to_center_distance_between_mounting_holes_along_width2.0000 INCHES NOMINAL IN
NSN3130-01-135-4230
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: 7930K13 · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE TYPE: ROUND, UNTHREADED
•
MOUNTING HOLE DIAMETER: 0.3125 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH: 2.0000 INCHES NOMINAL IN
•
BASE LENGTH: 2.7500 INCHES NOMINAL IN
•
BORE DIAMETER: 0.5000 INCHES NOMINAL IN
•
MATERIAL: STEEL HOUSING
•
HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE: 0.5600 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
MOUNTING HOLE TYPEROUND, UNTHREADED
MOUNTING HOLE DIAMETER0.3125 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH2.0000 INCHES NOMINAL IN
BASE LENGTH2.7500 INCHES NOMINAL IN
BORE DIAMETER0.5000 INCHES NOMINAL IN
MATERIALSTEEL HOUSING
MATERIALCOPPER ALLOY BEARING
HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE0.5600 INCHES NOMINAL IN
OTHER ITEMS IN FSC 3130 — Bearings, Mounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3130-00-001-5118 3130-00-001-5137 3130-00-001-6585 3130-00-003-0422 3130-00-003-0455 3130-00-003-0794 3130-00-003-2802 3130-00-003-9535
SUBSTITUTES & CROSS-REFERENCES 1
6364K13Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 7930K13?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7930K13?
7930K13 is a BEARING UNIT,PLAIN.
What parts can replace 7930K13?
There is 1 known substitute for 7930K13: 6364K13. Substitute compatibility should be verified for your specific system.
What is the NSN for 7930K13?
7930K13 is cataloged in the U.S. Government catalog under NSN 3130-01-135-4230. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7930K13