PartsTable
Technical Data Sheet
Download PDF

792970-1 — BEARING,BALL,ANNULAR

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

792970-1: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include features_provided: ELECTROSTATIC SENSITIVE, end_item_identification: TEST SET,ELECTRONIC, component_type_and_quantity: 1 DRUM AND 1 PLATE AND 3 ADHESIVE AND 1 PIN, part_name_assigned_by_controlling_agency: CCA,SIGNAL CONDITIONER. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-620-4110, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 792970-1
NSN: 3110-00-620-4110
NIINs: 006204110, 010439771, 010581921
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 35351 — GE AVIATION SYSTEMS LLC (USA)
SPECIFICATIONS
features_providedELECTROSTATIC SENSITIVE
end_item_identificationTEST SET,ELECTRONIC
component_type_and_quantity1 DRUM AND 1 PLATE AND 3 ADHESIVE AND 1 PIN
part_name_assigned_by_controlling_agencyCCA,SIGNAL CONDITIONER
NSN3110-00-620-4110
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 792970-1 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
INTERNAL CLEARANCE: 0.0002 INCHES MINIMUM RADIAL AND 0.0014 INCHES MAXIMUM RADIAL IN
•
FLANGE OUTSIDE DIAMETER: 0.2340 INCHES NOMINAL IN
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
BORE SHAPE: STRAIGHT
•
LOAD DIRECTION: RADIAL
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODPRESSED
INTERNAL CLEARANCE0.0002 INCHES MINIMUM RADIAL AND 0.0014 INCHES MAXIMUM RADIAL IN
FLANGE OUTSIDE DIAMETER0.2340 INCHES NOMINAL IN
SURFACE FINISHGROUND
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
OVERALL WIDTH0.0781 INCHES NOMINAL IN
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
FLANGE WIDTH0.0230 INCHES NOMINAL IN
OUTER RING OUTSIDE DIAMETER0.1875 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
79297Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 792970-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 792970-1?
792970-1 is a BEARING,BALL,ANNULAR. It is classified as a MRO (MRO_GENERAL).
What parts can replace 792970-1?
There is 1 known substitute for 792970-1: 79297. Substitute compatibility should be verified for your specific system.
What is the NSN for 792970-1?
792970-1 is cataloged in the U.S. Government catalog under NSN 3110-00-620-4110. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 792970-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.