PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 7929-28A
7929-28A ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The HANDLE,BOW is a the manufacturer industrial component. Key specifications include color: RED HANDLE, material: ALUMINUM ALLOY 6063 OVERALL, overall_length: 4.110 INCHES NOMINAL4.110 INCHES NOMINAL IN, handle_clearance: 0.750 INCHES NOMINAL0.750 INCHES NOMINAL IN, surface_treatment: LACQUER OVERALL, nominal_thread_size: 0.190 INCHES0.190 INCHES IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-296-8466, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7929-28A
NSN: 5340-01-296-8466
FSC: 5340
CAGE: 03007 — H. A. GUDEN COMPANY, INC. (USA)
SPECIFICATIONS
colorRED HANDLE
materialALUMINUM ALLOY 6063 OVERALL
overall_length4.110 INCHES NOMINAL4.110 INCHES NOMINAL IN
handle_clearance0.750 INCHES NOMINAL0.750 INCHES NOMINAL IN
surface_treatmentLACQUER OVERALL
nominal_thread_size0.190 INCHES0.190 INCHES IN
thread_series_designatorUNIFIED NATIONAL COARSE (UNC)
mounting_facility_quantity22
material_document_and_classificationQQ-A-200/9,T6 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
center_to_center_distance_between_mounting_facilities_parallel_to_length3.750 INCHES NOMINAL3.750 INCHES NOMINAL IN
NSN5340-01-296-8466
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7929-28A MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
NOMINAL THREAD SIZE: 0.190 INCHES0.190 INCHES IN
•
MATERIAL: ALUMINUM ALLOY 6063 OVERALL
•
SURFACE TREATMENT: LACQUER OVERALL
•
COLOR: RED HANDLE
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-200/9,T6 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
HANDLE CLEARANCE: 0.750 INCHES NOMINAL0.750 INCHES NOMINAL IN
•
MOUNTING FACILITY QUANTITY: 22
TECHNICAL CHARACTERISTICS (FLIS)
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
NOMINAL THREAD SIZE0.190 INCHES0.190 INCHES IN
MATERIALALUMINUM ALLOY 6063 OVERALL
SURFACE TREATMENTLACQUER OVERALL
COLORRED HANDLE
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-200/9,T6 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
HANDLE CLEARANCE0.750 INCHES NOMINAL0.750 INCHES NOMINAL IN
MOUNTING FACILITY QUANTITY22
OVERALL LENGTH4.110 INCHES NOMINAL4.110 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH3.750 INCHES NOMINAL3.750 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
F91L524Upgraded Successor
successor cross-reference
successor
00254900100Upgraded Successor
successor cross-reference
successor
92-1-16-140Upgraded Successor
successor cross-reference
successor
0481C0061Upgraded Successor
successor cross-reference
successor
7929Upgraded Successor
successor cross-reference
successor
TOMACInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 7929-28A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7929-28A?
7929-28A is a HANDLE,BOW.
What parts can replace 7929-28A?
There are 13 known substitutes for 7929-28A: F91L524, 00254900100, 92-1-16-140 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 7929-28A?
7929-28A is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-296-8466. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7929-28A

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026