PartsTable
Technical Data Sheet
Download PDF

792485 ITEM 79 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

792485 ITEM 79: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, hardness_rating: 65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM, center_hole_diameter: 0.122 INCHES MINIMUM AND 0.128 INCHES MAXIMUM IN, cross-sectional_height: 6.265 INCHES MINIMUM AND 6.335 INCHES MAXIMUM IN, material_document_and_classification: MIL-R-6855,CL 1,GR 70 MIL SPEC SINGLE MATERIAL RESPONSE. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-367-4220, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
792485 ITEM 79
NSN: 5331-01-367-4220
FSC: 5331 — O-ring
CAGE: 06481 — NORTHROP GRUMMAN SYSTEMS CORPORATION DBA NORTHROP GRUMMAN SYSTEMS CORP (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
hardness_rating65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM
center_hole_diameter0.122 INCHES MINIMUM AND 0.128 INCHES MAXIMUM IN
cross-sectional_height6.265 INCHES MINIMUM AND 6.335 INCHES MAXIMUM IN
material_document_and_classificationMIL-R-6855,CL 1,GR 70 MIL SPEC SINGLE MATERIAL RESPONSE
NSN5331-01-367-4220
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 792485 ITEM 79 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 6.265 INCHES MINIMUM AND 6.335 INCHES MAXIMUM IN
•
HARDNESS RATING: 65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-6855,CL 1,GR 70 MIL SPEC SINGLE MATERIAL RESPONSE
•
CENTER HOLE DIAMETER: 0.122 INCHES MINIMUM AND 0.128 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT6.265 INCHES MINIMUM AND 6.335 INCHES MAXIMUM IN
HARDNESS RATING65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-6855,CL 1,GR 70 MIL SPEC SINGLE MATERIAL RESPONSE
CENTER HOLE DIAMETER0.122 INCHES MINIMUM AND 0.128 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
OTHER ITEMS IN FSC 5331 — O-ring
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5331-00-001-1971 5331-00-001-1979 5331-00-001-3904 5331-00-001-3905 5331-00-001-3906 5331-00-001-3908 5331-00-001-3923 5331-00-001-3924
SUBSTITUTES & CROSS-REFERENCES 2
952240-21Reference document
Same NSN cross-reference
Reference document — Secondary reference
A5705-7187Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedAcquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 792485 ITEM 79?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 792485 ITEM 79?
792485 ITEM 79 is a O-RING.
What parts can replace 792485 ITEM 79?
There are 2 known substitutes for 792485 ITEM 79: 952240-21, A5705-7187. Substitute compatibility should be verified for your specific system.
What is the NSN for 792485 ITEM 79?
792485 ITEM 79 is cataloged in the U.S. Government catalog under NSN 5331-01-367-4220. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 792485 ITEM 79