PartsTable
Technical Data Sheet
Download PDF

79228-1 — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

79228-1: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL COMP E52100 INNER RING, bore_shape: STRAIGHT, bore_diameter: 17.0 MILLIMETERS NOMINAL MM, overall_width: 10.0 MILLIMETERS NOMINAL MM, load_direction: RADIAL, surface_finish: GROUND. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-028-0225, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
79228-1
NSN: 3110-01-028-0225
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 02101 — OECO, LLC DBA PACIFIC SCIENTIFIC OECO (USA)
SPECIFICATIONS
materialSTEEL COMP E52100 INNER RING
bore_shapeSTRAIGHT
bore_diameter17.0 MILLIMETERS NOMINAL MM
overall_width10.0 MILLIMETERS NOMINAL MM
seal_quantity2
load_directionRADIAL
surface_finishGROUND
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
bearing_seal_typeCONTACT
internal_clearance0.0009 INCHES MINIMUM RADIAL AND 0.0012 INCHES MAXIMUM RADIAL IN
lubrication_materialGREASE
calibration_designatorC11
NSN3110-01-028-0225
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 79228-1 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
BEARING SEAL TYPE: CONTACT
•
LUBRICATION MATERIAL: GREASE
•
INTERNAL CLEARANCE: 0.0009 INCHES MINIMUM RADIAL AND 0.0012 INCHES MAXIMUM RADIAL IN
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
OVERALL OUTSIDE DIAMETER: 35.0 MILLIMETERS NOMINAL MM
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODPRESSED
BEARING SEAL TYPECONTACT
LUBRICATION MATERIALGREASE
INTERNAL CLEARANCE0.0009 INCHES MINIMUM RADIAL AND 0.0012 INCHES MAXIMUM RADIAL IN
SURFACE FINISHGROUND
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
OVERALL WIDTH10.0 MILLIMETERS NOMINAL MM
OVERALL OUTSIDE DIAMETER35.0 MILLIMETERS NOMINAL MM
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES 1
103FFT6EV11G18Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 79228-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 79228-1?
79228-1 is a BEARING,BALL,ANNULAR.
What parts can replace 79228-1?
There is 1 known substitute for 79228-1: 103FFT6EV11G18. Substitute compatibility should be verified for your specific system.
What is the NSN for 79228-1?
79228-1 is cataloged in the U.S. Government catalog under NSN 3110-01-028-0225. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 79228-1