PartsTable
Technical Data Sheet
Download PDF

791436 — SEAL,PLAIN ENCASED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

791436: SEAL,PLAIN ENCASED.

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CASE, case_style: SQUARE, seal_width: 0.125 INCHES NOMINAL IN, temp_rating: -65.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF, housing_bore_diameter: 1.000 INCHES NOMINAL IN, sealing_element_style: VERTICAL. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-983-4370, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
791436
NSN: 5330-00-983-4370
FSC: 5330 — Packing and Gasket Materials
CAGE: 77237 — DANA OFF HIGHWAY PRODUCTS, LLC (USA)
SPECIFICATIONS
materialSTEEL CASE
case_styleSQUARE
seal_width0.125 INCHES NOMINAL IN
temp_rating-65.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF
housing_bore_diameter1.000 INCHES NOMINAL IN
sealing_element_styleVERTICAL
accommodated_shaft_diameter0.750 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed1000 FEET PER MINUTE FT
NSN5330-00-983-4370
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 791436 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -65.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF
•
SEAL WIDTH: 0.125 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: VERTICAL
•
HOUSING BORE DIAMETER: 1.000 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 1000 FEET PER MINUTE FT
•
CASE STYLE: SQUARE
•
ACCOMMODATED SHAFT DIAMETER: 0.750 INCHES NOMINAL IN
•
MATERIAL: STEEL CASE
TECHNICAL CHARACTERISTICS
TEMP RATING-65.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF
SEAL WIDTH0.125 INCHES NOMINAL IN
SEALING ELEMENT STYLEVERTICAL
HOUSING BORE DIAMETER1.000 INCHES NOMINAL IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED1000 FEET PER MINUTE FT
CASE STYLESQUARE
ACCOMMODATED SHAFT DIAMETER0.750 INCHES NOMINAL IN
MATERIALSTEEL CASE
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
SUBSTITUTES & CROSS-REFERENCES 5
89735R1Reference document
Same NSN cross-reference
Reference document — Secondary reference
44517Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
9834370Reference document
Same NSN cross-reference
Reference document — Secondary reference
120966Reference document
Same NSN cross-reference
Reference document — Secondary reference
240735Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 791436?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 791436?
791436 is a SEAL,PLAIN ENCASED.
What parts can replace 791436?
There are 5 known substitutes for 791436: 89735R1, 44517, 9834370 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 791436?
791436 is cataloged in the U.S. Government catalog under NSN 5330-00-983-4370. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 791436