PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 79131
79131 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CONE AND ROLLERS,TAPERED ROLLER. Key specifications include material: STEEL OVERALL, cone_width: 1.0013 INCHES NOMINAL IN, bore_diameter: 1.0625 INCHES NOMINAL IN, style_designator: NORMAL ANGLE, cone_corner_radius: 0.0625 INCHES NOMINAL IN, standard_tolerance_designation: AFBMA CLASS 2. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0734, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
79131
NSN: 3110-00-100-0734
FSC: 3110
CAGE: 60038 — THE TIMKEN CORPORATION (USA)
SPECIFICATIONS
materialSTEEL OVERALL
cone_width1.0013 INCHES NOMINAL IN
bore_diameter1.0625 INCHES NOMINAL IN
style_designatorNORMAL ANGLE
cone_corner_radius0.0625 INCHES NOMINAL IN
standard_tolerance_designationAFBMA CLASS 2
NSN3110-00-100-0734
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 79131 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CONE CORNER RADIUS: 0.0625 INCHES NOMINAL IN
•
BORE DIAMETER: 1.0625 INCHES NOMINAL IN
•
CONE WIDTH: 1.0013 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
STYLE DESIGNATOR: NORMAL ANGLE
•
MATERIAL: STEEL OVERALL
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
CONE CORNER RADIUS0.0625 INCHES NOMINAL IN
BORE DIAMETER1.0625 INCHES NOMINAL IN
CONE WIDTH1.0013 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
STYLE DESIGNATORNORMAL ANGLE
MATERIALSTEEL OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
2688Interchangeable
interchangeable cross-reference
interchangeable
RH25X000K8R000HInterchangeable
interchangeable cross-reference
interchangeable
RER70F8R06RInterchangeable
interchangeable cross-reference
interchangeable
RH25-8R00FInterchangeable
interchangeable cross-reference
interchangeable
C8TZ-2004-MInterchangeable
interchangeable cross-reference
interchangeable
175-318Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 79131?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 79131?
79131 is a CONE AND ROLLERS,TAPERED ROLLER.
What parts can replace 79131?
There are 20 known substitutes for 79131: 2688, RH25X000K8R000H, RER70F8R06R and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 79131?
79131 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0734. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 79131

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026