PartsTable
Technical Data Sheet
Download PDF

790372 — RESISTOR,VARIABLE,WIRE WOUND,NON

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

790372: RESISTOR,VARIABLE,WIRE WOUND,NON.

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include body_style: CYLINDRICAL SERVO MOUNTED, body_length: 1.000 INCHES MAXIMUM IN, shaft_style: ROUND, SLOTTED, bearing_type: BEARING SHAFT, pilot_length: 0.06200 INCHES NOMINAL IN, shaft_length: 0.440 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5905-00-848-5516, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 790372
NSN: 5905-00-848-5516
FSC: 5905 — Resistor
CAGE: 93322 — GE AVIATION SYSTEMS LLC DBA GE AVIATION (USA)
SPECIFICATIONS
body_styleCYLINDRICAL SERVO MOUNTED
body_length1.000 INCHES MAXIMUM IN
shaft_styleROUND, SLOTTED
bearing_typeBEARING SHAFT
pilot_length0.06200 INCHES NOMINAL IN
shaft_length0.440 INCHES NOMINAL IN
shaft_runout0.004 INCHES IN
actuator_typeDOUBLE ENDED SHAFT
lateral_runout0.001 INCHES IN
pilot_diameter0.74950 INCHES MINIMUM AND 0.75000 INCHES MAXIMUM IN
shaft_diameter0.1249 INCHES MINIMUM AND 0.1250 INCHES MAXIMUM IN
shaft_end_play0.00400 INCHES IN
NSN5905-00-848-5516
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available RESISTOR,VARIABLE,WIRE WOUND,NON TITLE COMPONENT PN 790372 MFR RESISTOR,VARIABLE,WIRE
KEY FEATURES
•
LATERAL RUNOUT: 0.001 INCHES IN
•
MOUNTING LIP DEPTH: 0.06200 INCHES NOMINAL IN
•
UNDERCUT WIDTH: 0.05700 INCHES MINIMUM IN
•
SECTION QUANTITY: 1
•
SHAFT DIAMETER: 0.1249 INCHES MINIMUM AND 0.1250 INCHES MAXIMUM IN
•
UNDERCUT DIAMETER: 0.781 INCHES MAXIMUM IN
•
BODY STYLE: CYLINDRICAL SERVO MOUNTED
•
SHAFT END PLAY: 0.00400 INCHES IN
TECHNICAL CHARACTERISTICS
LATERAL RUNOUT0.001 INCHES IN
MOUNTING LIP DEPTH0.06200 INCHES NOMINAL IN
UNDERCUT WIDTH0.05700 INCHES MINIMUM IN
SECTION QUANTITY1
SHAFT DIAMETER0.1249 INCHES MINIMUM AND 0.1250 INCHES MAXIMUM IN
UNDERCUT DIAMETER0.781 INCHES MAXIMUM IN
BODY STYLECYLINDRICAL SERVO MOUNTED
SHAFT END PLAY0.00400 INCHES IN
TERMINAL LENGTH0.250 INCHES NOMINAL IN
MOUNTING METHODCLAMP RING(S)
SUBSTITUTES & CROSS-REFERENCES 2
1200-1127Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
7903072Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 790372?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 790372?
790372 is a RESISTOR,VARIABLE,WIRE WOUND,NON. It is classified as a MRO (MRO_GENERAL).
What parts can replace 790372?
There are 2 known substitutes for 790372: 1200-1127, 7903072. Substitute compatibility should be verified for your specific system.
What is the NSN for 790372?
790372 is cataloged in the U.S. Government catalog under NSN 5905-00-848-5516. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 790372

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.