PartsTable / COMPONENT / 79003
79003
✓ Verified by PartsTable
Hama · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW
- Scart plugs in trendy two-coloured New Age design<br>- Excellent strain relief and bend protection<br>- 24K gold-plated contacts<br>- High-quality and selected components<br>- 21-pin fully assigned<br>- S-VHS suitable<br>- Separately screened lines for audio/video and RGB(S-VHS)<br>- Easier plug-in of 2 plugs thanks to the special construction<br>- Packed in blister This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-151-2948, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
79003
NSN: 5305-00-151-2948 FSC: 5305 CAGE: 57733 — STEWART-WARNER CORPORATION (USA)
SPECIFICATIONS
end_type TERMINAL ATTACHMENT BOTH ENDS material STEEL CORROSION RESISTING WIRE ROPE head_style FILLISTER head_height 0.106 INCHES MINIMUM AND 0.113 INCHES MAXIMUM IN thread_class 2A A head_diameter 0.250 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN thread_length 0.313 INCHES NOMINAL IN overall_height 1.000 INCHES NOMINAL IN overall_length 8.0 INCHES NOMINAL IN screw_material STEEL fastener_length 0.313 INCHES NOMINAL IN inside_diameter 1.625 INCHES NOMINAL IN NSN 5305-00-151-2948
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED
Hex HEAD
LENGTH: —
THREAD: — × —
MATERIAL: —
PN: 79003 · Hama
⚠ VERIFY BEFORE ORDERING
Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part.
Grade/class stamped on bolt head determines tensile strength
✓ BROKER TIP
Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2.
Always confirm head marking matches specification requirement
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• INTERNAL DRIVE STYLE: SLOT
• THREAD DIRECTION: RIGHT-HAND
• THREAD QUANTITY PER INCH: 32
• HEAD HEIGHT: 0.106 INCHES MINIMUM AND 0.113 INCHES MAXIMUM IN
• HEAD DIAMETER: 0.250 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
• SCREW SURFACE TREATMENT: CADMIUM
• NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 4S STYLE
TECHNICAL CHARACTERISTICS (FLIS)
INTERNAL DRIVE STYLE SLOT THREAD CLASS 2A A THREAD DIRECTION RIGHT-HAND THREAD QUANTITY PER INCH 32 HEAD HEIGHT 0.106 INCHES MINIMUM AND 0.113 INCHES MAXIMUM IN HEAD DIAMETER 0.250 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN SCREW SURFACE TREATMENT CADMIUM NONDEFINITIVE SPEC/STD DATA 1 TYPE AND 4S STYLE HEAD STYLE FILLISTER FASTENER LENGTH 0.313 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
870888 Interchangeable interchangeable cross-reference
interchangeable
870377 Interchangeable interchangeable cross-reference
interchangeable
7803 Interchangeable interchangeable cross-reference
interchangeable
A7803 Interchangeable interchangeable cross-reference
interchangeable
24752 Interchangeable interchangeable cross-reference
interchangeable
L28-40RED Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 79003?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 79003?
79003 is a WIRE ROPE ASSEMBLY,SINGLE LEG manufactured by Hama.
What parts can replace 79003?
There are 21 known substitutes for 79003: 870888, 870377, 7803 and 18 more. Substitute compatibility should be verified for your specific system.
Is 79003 still available?
79003 is currently cancelled.