PartsTable
Technical Data Sheet
Download PDF

790005-1 — PLATE,MOUNTING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

790005-1: PLATE,MOUNTING.

The PLATE,MOUNTING is a the manufacturer industrial component. Key specifications include shape: SPECIAL, width: 0.900 INCHES MINIMUM AND 0.900 INCHES MINIMUM AND 0.970 INCHES MAXIMUM0.970 INCHES MAXIMUM IN, length: 1.880 INCHES MINIMUM AND 1.880 INCHES MINIMUM AND 1.900 INCHES MAXIMUM1.900 INCHES MAXIMUM IN, material: ALUMINUM ALLOY 6061, thickness: 0.100 INCHES NOMINAL0.100 INCHES NOMINAL IN, corner_radius: 0.150 INCHES MINIMUM AND 0.170 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-325-9196, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
790005-1
NSN: 5340-01-325-9196
FSC: 5340 — Hardware, Commercial
CAGE: 73030 — HAMILTON SUNDSTRAND CORPORATION DBA COLLINS AEROSPACE (USA)
SPECIFICATIONS
shapeSPECIAL
width0.900 INCHES MINIMUM AND 0.900 INCHES MINIMUM AND 0.970 INCHES MAXIMUM0.970 INCHES MAXIMUM IN
length1.880 INCHES MINIMUM AND 1.880 INCHES MINIMUM AND 1.900 INCHES MAXIMUM1.900 INCHES MAXIMUM IN
materialALUMINUM ALLOY 6061
thickness0.100 INCHES NOMINAL0.100 INCHES NOMINAL IN
corner_radius0.150 INCHES MINIMUM AND 0.170 INCHES MAXIMUM IN
aperture_shapeROUND
aperture_diameter0.203 INCHES MINIMUM AND 0.207 INCHES MAXIMUM IN
features_providedAPERTURE
mounting_hole_typeUNTHREADED
mounting_hole_diameter0.144 INCHES MINIMUM AND 0.150 INCHES MAXIMUM ALL HOLES IN
mounting_hole_quantity4
NSN5340-01-325-9196
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 790005-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 4
•
CORNER RADIUS: 0.150 INCHES MINIMUM AND 0.170 INCHES MAXIMUM IN
•
LENGTH: 1.880 INCHES MINIMUM AND 1.880 INCHES MINIMUM AND 1.900 INCHES MAXIMUM1.900 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS4027 FED SPEC ALL MATERIAL RESPONSES
•
MOUNTING HOLE DIAMETER: 0.144 INCHES MINIMUM AND 0.150 INCHES MAXIMUM ALL HOLES IN
•
SHAPE: SPECIAL
•
APERTURE DIAMETER: 0.203 INCHES MINIMUM AND 0.207 INCHES MAXIMUM IN
•
FEATURES PROVIDED: APERTURE
TECHNICAL CHARACTERISTICS
MOUNTING HOLE QUANTITY4
CORNER RADIUS0.150 INCHES MINIMUM AND 0.170 INCHES MAXIMUM IN
LENGTH1.880 INCHES MINIMUM AND 1.880 INCHES MINIMUM AND 1.900 INCHES MAXIMUM1.900 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS4027 FED SPEC ALL MATERIAL RESPONSES
MOUNTING HOLE DIAMETER0.144 INCHES MINIMUM AND 0.150 INCHES MAXIMUM ALL HOLES IN
SHAPESPECIAL
APERTURE DIAMETER0.203 INCHES MINIMUM AND 0.207 INCHES MAXIMUM IN
FEATURES PROVIDEDAPERTURE
WIDTH0.900 INCHES MINIMUM AND 0.900 INCHES MINIMUM AND 0.970 INCHES MAXIMUM0.970 INCHES MAXIMUM IN
END ITEM IDENTIFICATIONF112WR100 ENGINE
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)Demilitarization required — critical (Q)
Ready to buy 790005-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 790005-1?
790005-1 is a PLATE,MOUNTING.
What is the NSN for 790005-1?
790005-1 is cataloged in the U.S. Government catalog under NSN 5340-01-325-9196. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 790005-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.