PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 79-600MS
79-600MS ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include rim_surface_width: 0.220 INCHES NOMINAL IN, peripheral_diameter: 6.720 INCHES NOMINAL IN, center_hole_diameter: 6.152 INCHES NOMINAL IN, cross-sectional_height: 0.430 INCHES NOMINAL IN, end_item_identification: ARMORED MULTI-PURPOSE VEHICLE (AMPV); A4 BRADLEY FIGHTING VEHICLE; A3 BRADLEY FIGHTING VEHICLE, material_document_and_classification: AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-323-2927, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
79-600MS
NSN: 5330-01-323-2927
FSC: 5330
CAGE: 55996 — DYNAFLEX PRODUCTS (USA)
SPECIFICATIONS
rim_surface_width0.220 INCHES NOMINAL IN
peripheral_diameter6.720 INCHES NOMINAL IN
center_hole_diameter6.152 INCHES NOMINAL IN
cross-sectional_height0.430 INCHES NOMINAL IN
end_item_identificationARMORED MULTI-PURPOSE VEHICLE (AMPV); A4 BRADLEY FIGHTING VEHICLE; A3 BRADLEY FIGHTING VEHICLE
material_document_and_classificationAISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5330-01-323-2927
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 79-600MS MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 6.152 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1012 OR STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
RIM SURFACE WIDTH: 0.220 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.430 INCHES NOMINAL IN
•
PERIPHERAL DIAMETER: 6.720 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER6.152 INCHES NOMINAL IN
MATERIALSTEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1012 OR STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OVERALL
END ITEM IDENTIFICATIONARMORED MULTI-PURPOSE VEHICLE (AMPV); A4 BRADLEY FIGHTING VEHICLE; A3 BRADLEY FIGHTING VEHICLE
MATERIAL DOCUMENT AND CLASSIFICATIONAISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
RIM SURFACE WIDTH0.220 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.430 INCHES NOMINAL IN
PERIPHERAL DIAMETER6.720 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
77-500Interchangeable
interchangeable cross-reference
interchangeable
11669395-32Interchangeable
interchangeable cross-reference
interchangeable
11669395Interchangeable
interchangeable cross-reference
interchangeable
73-600MSInterchangeable
interchangeable cross-reference
interchangeable
11669395-4Interchangeable
interchangeable cross-reference
interchangeable
11669395-42Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 79-600MS?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 79-600MS?
79-600MS is a RETAINER,PACKING.
What parts can replace 79-600MS?
There are 13 known substitutes for 79-600MS: 77-500, 11669395-32, 11669395 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 79-600MS?
79-600MS is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-323-2927. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 79-600MS

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026