PartsTable
Technical Data Sheet
Download PDF

7885795 — PIN,GROOVED,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

7885795: PIN,GROOVED,HEADLESS.

The PIN,GROOVED,HEADLESS is a the manufacturer industrial component. Key specifications include diameter: 0.0384 INCHES MINIMUM AND 0.0386 INCHES MAXIMUM IN, material: NICKEL ALLOY OVERALL, overall_length: 0.220 INCHES MINIMUM AND 0.230 INCHES MAXIMUM IN, surface_finish: 64.0 MICROINCHES OVERALL, undercut_width: 0.050 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN, first_end_style: SQUARE. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-096-7073, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7885795
NSN: 5315-01-096-7073
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 09691 — L3HARRIS MAS INC DIV L3HARRIS MAS INC. (CAN)
SPECIFICATIONS
diameter0.0384 INCHES MINIMUM AND 0.0386 INCHES MAXIMUM IN
materialNICKEL ALLOY OVERALL
overall_length0.220 INCHES MINIMUM AND 0.230 INCHES MAXIMUM IN
surface_finish64.0 MICROINCHES OVERALL
undercut_width0.050 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
first_end_styleSQUARE
effective_length0.135 INCHES MINIMUM AND 0.160 INCHES MAXIMUM IN
second_end_styleCHAMFERED
style_designatorGROOVE
undercut_diameter0.028 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN
first_end_locationSQUARE END
second_end_taper_angle15.0 DEGREES NOMINAL
NSN5315-01-096-7073
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 7885795 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 64.0 MICROINCHES OVERALL
•
UNDERCUT WIDTH: 0.050 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
•
UNDERCUT DIAMETER: 0.028 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN
•
FIRST END LOCATION: SQUARE END
•
SECOND END TAPER ANGLE: 15.0 DEGREES NOMINAL
•
FIRST END STYLE: SQUARE
•
STYLE DESIGNATOR: GROOVE
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-W-390 TEMPER B FED SPEC SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS
SURFACE FINISH64.0 MICROINCHES OVERALL
UNDERCUT WIDTH0.050 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
UNDERCUT DIAMETER0.028 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN
FIRST END LOCATIONSQUARE END
SECOND END TAPER ANGLE15.0 DEGREES NOMINAL
FIRST END STYLESQUARE
STYLE DESIGNATORGROOVE
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-W-390 TEMPER B FED SPEC SINGLE MATERIAL RESPONSE OVERALL
DIAMETER0.0384 INCHES MINIMUM AND 0.0386 INCHES MAXIMUM IN
OVERALL LENGTH0.220 INCHES MINIMUM AND 0.230 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 7885795?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7885795?
7885795 is a PIN,GROOVED,HEADLESS.
What is the NSN for 7885795?
7885795 is cataloged in the U.S. Government catalog under NSN 5315-01-096-7073. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7885795