PartsTable
Technical Data Sheet
Download PDF

7880-C9-SS — STRIKE,CATCH

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

7880-C9-SS: STRIKE,CATCH.

The STRIKE,CATCH is a the manufacturer industrial component. Key specifications include height: 0.290 INCHES NOMINAL IN, tongue_width: 0.590 INCHES NOMINAL IN, overall_width: 0.800 INCHES NOMINAL IN, tongue_length: 0.210 INCHES NOMINAL IN, overall_length: 1.180 INCHES NOMINAL IN, material_thickness: 0.060 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-307-7414, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7880-C9-SS
NSN: 5340-01-307-7414
FSC: 5340 — Hardware, Commercial
CAGE: 72794 — SOUTHCO INC (USA)
SPECIFICATIONS
height0.290 INCHES NOMINAL IN
tongue_width0.590 INCHES NOMINAL IN
overall_width0.800 INCHES NOMINAL IN
tongue_length0.210 INCHES NOMINAL IN
overall_length1.180 INCHES NOMINAL IN
material_thickness0.060 INCHES NOMINAL IN
first_surface_hole_size0.164 INCHES MINIMUM AND 0.170 INCHES MAXIMUM IN
first_surface_hole_quantity2
NSN5340-01-307-7414
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7880-C9-SS MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TONGUE WIDTH: 0.590 INCHES NOMINAL IN
•
FIRST SURFACE HOLE SIZE: 0.164 INCHES MINIMUM AND 0.170 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.060 INCHES NOMINAL IN
•
HEIGHT: 0.290 INCHES NOMINAL IN
•
TONGUE LENGTH: 0.210 INCHES NOMINAL IN
•
FIRST SURFACE HOLE QUANTITY: 2
TECHNICAL CHARACTERISTICS
TONGUE WIDTH0.590 INCHES NOMINAL IN
OVERALL LENGTH1.180 INCHES NOMINAL IN
OVERALL WIDTH0.800 INCHES NOMINAL IN
FIRST SURFACE HOLE SIZE0.164 INCHES MINIMUM AND 0.170 INCHES MAXIMUM IN
MATERIAL THICKNESS0.060 INCHES NOMINAL IN
HEIGHT0.290 INCHES NOMINAL IN
TONGUE LENGTH0.210 INCHES NOMINAL IN
FIRST SURFACE HOLE QUANTITY2
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 6
5340PL0857450Reference document
Same NSN cross-reference
Reference document — Informative reference only
A40071-3CSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
C5136315Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
03A274-02SSSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
TL800-9SSReference document
Same NSN cross-reference
Reference document — Secondary reference
M5580-7SSSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 7880-C9-SS?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7880-C9-SS?
7880-C9-SS is a STRIKE,CATCH.
What parts can replace 7880-C9-SS?
There are 6 known substitutes for 7880-C9-SS: 5340PL0857450, A40071-3C, C5136315 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 7880-C9-SS?
7880-C9-SS is cataloged in the U.S. Government catalog under NSN 5340-01-307-7414. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7880-C9-SS

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.