PartsTable
Technical Data Sheet
Download PDF

7880-C7-SS — STRIKE,CATCH

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

7880-C7-SS: STRIKE,CATCH.

The STRIKE,CATCH is a the manufacturer industrial component. Key specifications include material: UNABLE TO DECODE, tongue_width: 0.590 INCHES NOMINAL IN, overall_width: 0.540 INCHES NOMINAL IN, overall_length: 1.180 INCHES NOMINAL IN, mounting_facility: UNTHREADED HOLE(S), surface_treatment: UNABLE TO DECODE. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-347-7520, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7880-C7-SS
NSN: 5340-01-347-7520
FSC: 5340 — Hardware, Commercial
CAGE: 72794 — SOUTHCO INC (USA)
SPECIFICATIONS
materialUNABLE TO DECODE
tongue_width0.590 INCHES NOMINAL IN
overall_width0.540 INCHES NOMINAL IN
overall_length1.180 INCHES NOMINAL IN
mounting_facilityUNTHREADED HOLE(S)
surface_treatmentUNABLE TO DECODE
material_thickness0.060 INCHES NOMINAL IN
first_surface_hole_size0.167 INCHES NOMINAL IN
first_surface_hole_quantity2
NSN5340-01-347-7520
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7880-C7-SS MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TONGUE WIDTH: 0.590 INCHES NOMINAL IN
•
FIRST SURFACE HOLE SIZE: 0.167 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.060 INCHES NOMINAL IN
•
MOUNTING FACILITY: UNTHREADED HOLE(S)
•
SURFACE TREATMENT: UNABLE TO DECODE
•
MATERIAL: UNABLE TO DECODE
TECHNICAL CHARACTERISTICS
TONGUE WIDTH0.590 INCHES NOMINAL IN
OVERALL LENGTH1.180 INCHES NOMINAL IN
OVERALL WIDTH0.540 INCHES NOMINAL IN
FIRST SURFACE HOLE SIZE0.167 INCHES NOMINAL IN
MATERIAL THICKNESS0.060 INCHES NOMINAL IN
MOUNTING FACILITYUNTHREADED HOLE(S)
SURFACE TREATMENTUNABLE TO DECODE
MATERIALUNABLE TO DECODE
FIRST SURFACE HOLE QUANTITY2
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 2
03A298-02SSReference document
Same NSN cross-reference
Reference document — Secondary reference
TL800-7SSReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 7880-C7-SS?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7880-C7-SS?
7880-C7-SS is a STRIKE,CATCH.
What parts can replace 7880-C7-SS?
There are 2 known substitutes for 7880-C7-SS: 03A298-02SS, TL800-7SS. Substitute compatibility should be verified for your specific system.
What is the NSN for 7880-C7-SS?
7880-C7-SS is cataloged in the U.S. Government catalog under NSN 5340-01-347-7520. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7880-C7-SS

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.