PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 7867352P22
7867352P22 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,LOCK is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY OVERALL, hole_diameter: 0.505 INCHES MINIMUM AND 0.512 INCHES MAXIMUM IN, outside_diameter: 0.620 INCHES MINIMUM AND 0.630 INCHES MAXIMUM IN, style_designator: FLAT INTERNAL TEETH, surface_treatment: CADMIUM OVERALL, material_thickness: 0.022 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-261-7606, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7867352P22
NSN: 5310-00-261-7606
FSC: 5310
CAGE: 24446 — GENERAL ELECTRIC COMPANY (USA)
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
hole_diameter0.505 INCHES MINIMUM AND 0.512 INCHES MAXIMUM IN
outside_diameter0.620 INCHES MINIMUM AND 0.630 INCHES MAXIMUM IN
style_designatorFLAT INTERNAL TEETH
surface_treatmentCADMIUM OVERALL
material_thickness0.022 INCHES NOMINAL IN
surface_treatment_document_and_classificationQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5310-00-261-7606
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 7867352P22 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT: CADMIUM OVERALL
•
STYLE DESIGNATOR: FLAT INTERNAL TEETH
•
MATERIAL: COPPER ALLOY OVERALL
•
HOLE DIAMETER: 0.505 INCHES MINIMUM AND 0.512 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 0.620 INCHES MINIMUM AND 0.630 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.022 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENTCADMIUM OVERALL
STYLE DESIGNATORFLAT INTERNAL TEETH
MATERIALCOPPER ALLOY OVERALL
HOLE DIAMETER0.505 INCHES MINIMUM AND 0.512 INCHES MAXIMUM IN
OUTSIDE DIAMETER0.620 INCHES MINIMUM AND 0.630 INCHES MAXIMUM IN
MATERIAL THICKNESS0.022 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
5-31922-211Interchangeable
interchangeable cross-reference
interchangeable
19242Interchangeable
interchangeable cross-reference
interchangeable
49116304Interchangeable
interchangeable cross-reference
interchangeable
0927023-2Interchangeable
interchangeable cross-reference
interchangeable
78016Interchangeable
interchangeable cross-reference
interchangeable
B-11843-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 7867352P22?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7867352P22?
7867352P22 is a WASHER,LOCK.
What parts can replace 7867352P22?
There are 6 known substitutes for 7867352P22: 5-31922-211, 19242, 49116304 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 7867352P22?
7867352P22 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-261-7606. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7867352P22

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026