PartsTable
Technical Data Sheet
PartsTable / O-RING / 786615-1
786615-1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The TRANSFORMER,RADIO FREQUENCY is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, body_length: 0.560 INCHES MAXIMUM IN, rating_method: WINDING TURNS SINGLE COMPONENT SINGLE PRIMARY, turn_quantity: 10 SINGLE COMPONENT SECOND SECONDARY, coil_form_type: SOLID SINGLE COMPONENT, inclosure_type: FULLY INCLOSED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-935-9226, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
786615-1
NSN: 5331-00-935-9226
FSC: 5331 — O-RING
CAGE: 25184 — PARKER HANNIFIN CORPORATION DIV O-RING DIVISION (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
body_length0.560 INCHES MAXIMUM IN
rating_methodWINDING TURNS SINGLE COMPONENT SINGLE PRIMARY
turn_quantity10 SINGLE COMPONENT SECOND SECONDARY
coil_form_typeSOLID SINGLE COMPONENT
inclosure_typeFULLY INCLOSED
mounting_methodFERRULE SINGLE GROUP
frequency_rating15.0 KILOHERTZ NOMINAL SINGLE COMPONENT
outside_diameter3.163 INCHES MINIMUM AND 3.223 INCHES MAXIMUM IN
center_hole_diameter2.972 INCHES MINIMUM AND 3.002 INCHES MAXIMUM IN
transformer_functionOUTPUT
body_outside_diameter1.120 INCHES MAXIMUM IN
NSN5331-00-935-9226
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 786615-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 3.163 INCHES MINIMUM AND 3.223 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 2.972 INCHES MINIMUM AND 3.002 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER3.163 INCHES MINIMUM AND 3.223 INCHES MAXIMUM IN
CENTER HOLE DIAMETER2.972 INCHES MINIMUM AND 3.002 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
786615-1Interchangeable
interchangeable cross-reference
interchangeable
786615Interchangeable
interchangeable cross-reference
interchangeable
01242HInterchangeable
Same NIIN cross-reference
interchangeable
PRP568-151-457-60Interchangeable
Same NIIN cross-reference
interchangeable
2-151 N602-70Interchangeable
Same NIIN cross-reference
interchangeable
10V60-141-151Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 786615-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 786615-1?
786615-1 is a TRANSFORMER,RADIO FREQUENCY.
What parts can replace 786615-1?
There are 10 known substitutes for 786615-1: 786615-1, 786615, 01242H and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 786615-1?
786615-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-935-9226. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 786615-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026