The CLAMP,LOOP is a Clementoni industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR FLOAT, current_type: DC, overall_width: 3.000 INCHES NOMINAL IN, terminal_type: CONNECTOR, RECEPTACLE, overall_height: 40.250 INCHES NOMINAL IN, overall_length: 5.500 INCHES NOMINAL IN. This part is cataloged in the U.S.
Government catalog under NSN 5340-01-134-8377, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
78514
NSN:5340-01-134-8377 NIINs:011348377, 012252802 FSC:5340 — Hardware, Commercial CAGE:83930 — TRANSDIGM INC DBA ADEL WIGGINS GROUP DIV ADEL WIGGINS (USA)
SPECIFICATIONS
material
RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR FLOAT
current_type
DC
overall_width
3.000 INCHES NOMINAL IN
terminal_type
CONNECTOR, RECEPTACLE
overall_height
40.250 INCHES NOMINAL IN
overall_length
5.500 INCHES NOMINAL IN
voltage_rating
12.0 VOLTS NOMINAL
mounting_method
BRACKET(S)
pressure_rating
400.000 POUNDS PER SQUARE INCH GAGE (PSIG) NOMINAL LBS
actuation_method
FLOAT
terminal_quantity
3
float_effective_travel
30.000 INCHES NOMINAL IN
NSN
5340-01-134-8377
COMPONENT DIAGRAM
KEY FEATURES
•
LUG HOLE DIAMETER: 0.199 INCHES NOMINAL IN
•
CUSHIONING ENVIRONMENTAL PROTECTION: FLAME RESISTANT AND HEAT AND OIL RESISTANT AND WEATHER RESISTANT
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND LUG HOLE: 0.750 INCHES NOMINAL IN
•
DISTANCE FROM OUTER EDGE OF LUG TO HOLE CENTER: 0.250 INCHES NOMINAL IN
•
STYLE DESIGNATOR: RIGHT HAND CLAMP & BRACKET
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-362,COND 0 FED SPEC SINGLE MATERIAL RESPONSE BAND
•
DIAMETER: 0.199 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
LUG HOLE DIAMETER
0.199 INCHES NOMINAL IN
CUSHIONING ENVIRONMENTAL PROTECTION
FLAME RESISTANT AND HEAT AND OIL RESISTANT AND WEATHER RESISTANT
CENTER TO CENTER DISTANCE BETWEEN LOOP AND LUG HOLE
0.750 INCHES NOMINAL IN
DISTANCE FROM OUTER EDGE OF LUG TO HOLE CENTER
0.250 INCHES NOMINAL IN
STYLE DESIGNATOR
RIGHT HAND CLAMP & BRACKET
MATERIAL DOCUMENT AND CLASSIFICATION
QQ-A-362,COND 0 FED SPEC SINGLE MATERIAL RESPONSE BAND
DIAMETER
0.199 INCHES NOMINAL IN
OVERALL WIDTH
0.625 INCHES NOMINAL IN
MATERIAL THICKNESS
0.040 INCHES NOMINAL IN
LUG WIDTH
0.500 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES
No substitute or cross-reference records for this part.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 78514?
78514 is a CLAMP,LOOP manufactured by Clementoni.
What is the NSN for 78514?
78514 is cataloged in the U.S. Government catalog under NSN 5340-01-134-8377. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.