PartsTable
Technical Data Sheet
Download PDF

7844 — 7844

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

7844: 7844.

The 7844 is a the manufacturer industrial component. Key specifications include end_item_identification: THE HOLMAN GROUP MODEL T710 TOASTER, maximum_wattage_rating_in_watts: 700.0 ALL VOLTAGES, voltage_in_volts_and_current_type: 240.0 AC SECOND VOLTAGE. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-042-5076, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 7844
NSN: 5340-00-042-5076
NIINs: 000425076, 004924375, 008426095, 010156562, 012243028
FSC: 5340 — Hardware, Commercial
CAGE: 83930 — TRANSDIGM INC DBA ADEL WIGGINS GROUP DIV ADEL WIGGINS (USA)
SPECIFICATIONS
end_item_identificationTHE HOLMAN GROUP MODEL T710 TOASTER
maximum_wattage_rating_in_watts700.0 ALL VOLTAGES
voltage_in_volts_and_current_type240.0 AC SECOND VOLTAGE
NSN5340-00-042-5076
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7844 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUG HOLE DIAMETER: 0.199 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND LUG HOLE: 1.039 INCHES NOMINAL IN
•
DISTANCE FROM OUTER EDGE OF LUG TO HOLE CENTER: 0.250 INCHES NOMINAL IN
•
STYLE DESIGNATOR: RIGHT HAND CLAMP & BRACKET
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-362,T4 FED SPEC SINGLE MATERIAL RESPONSE BAND
•
DIAMETER: 0.199 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.040 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
LUG HOLE DIAMETER0.199 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND LUG HOLE1.039 INCHES NOMINAL IN
DISTANCE FROM OUTER EDGE OF LUG TO HOLE CENTER0.250 INCHES NOMINAL IN
STYLE DESIGNATORRIGHT HAND CLAMP & BRACKET
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-362,T4 FED SPEC SINGLE MATERIAL RESPONSE BAND
DIAMETER0.199 INCHES NOMINAL IN
OVERALL WIDTH0.500 INCHES NOMINAL IN
MATERIAL THICKNESS0.040 INCHES NOMINAL IN
LUG WIDTH0.500 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.796 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 7844?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7844?
7844 is a 7844. It is classified as a MRO (MRO_GENERAL).
What is the NSN for 7844?
7844 is cataloged in the U.S. Government catalog under NSN 5340-00-042-5076. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7844

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.