PartsTable
Technical Data Sheet
PartsTable / MRO / 7838
7838 ✓ Verified by PartsTable
Multibrackets · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
2RS = sealed for life, ZZ = shielded re-greaseable ABEC grade: higher = tighter tolerance
ABEC-1 standard, ABEC-7+ for precision spindles
PRODUCT OVERVIEW

Start replacing static signage with LG outdoor IP display series and Multibrackets IP-series LG mounts. With a focus on functionality and aesthetics, Multibrackets all-weather rated LG IP Wall mounts is ideal for sharing commercial messages, information, travel, and weather details, as well as wayfinding, advertising, entertainment, and more.<br>An Outdoor wall mount for the LG IP49 display<br>Made for outdoor use this wall mount specifically designed with the technical specifications of LG 49XE4F-M in mind (Mounting holes set at specific points to match LG 49XE4F-M) this wall mount will integrate your screen with the highest quality and fine tune adjustment possibilities. This wall mount is 100% anti-corrosion and was made to support your outdoor installation.<br><br>Portrait or landscape mode<br>To simplify the installation process, this wall mount is suitable for both landscape and portrait installations.<br><br>Fine tune to perfection & Anti theft<br>With built in adjustment possib This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3120-00-340-3307, indicating validated use in U.S.

government and defense logistics supply chains.

WHERE IT FITS
MRO→ MRO_GENERAL→ 7838
NSN: 3120-00-340-3307
FSC: 3120
CAGE: 81601 — NORFOLK NAVAL SHIPYARD (USA)
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
body_width1.065 INCHES NOMINAL IN
body_height0.350 INCHES NOMINAL IN
body_length1.065 INCHES NOMINAL IN
corner_shapeSQUARE INSIDE RIGHT CORNER
flange_width0.1875 INCHES NOMINAL IN
body_materialMETAL
bore_diameter2.250 INCHES NOMINAL IN
overall_width2.700 INCHES NOMINAL IN
inclosure_typeHERMETICALLY SEALED
overall_height0.452 INCHES NOMINAL IN
overall_length1.0000 INCHES NOMINAL IN
NSN3120-00-340-3307
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: 7838 · Multibrackets ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLANGE WIDTH: 0.1875 INCHES NOMINAL IN
•
BODY INSIDE DIAMETER: 1.1100 INCHES MINIMUM AND 1.1200 INCHES MAXIMUM IN
•
CORNER SHAPE: SQUARE INSIDE RIGHT CORNER
•
MATERIAL: COPPER ALLOY OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL LENGTH1.0000 INCHES NOMINAL IN
FLANGE WIDTH0.1875 INCHES NOMINAL IN
BODY INSIDE DIAMETER1.1100 INCHES MINIMUM AND 1.1200 INCHES MAXIMUM IN
CORNER SHAPESQUARE INSIDE RIGHT CORNER
CORNER SHAPESQUARE INSIDE LEFT CORNER
MATERIALCOPPER ALLOY OVERALL
CORNER SHAPESQUARE LEFT FLANGE BODY CORNER
CORNER SHAPESQUARE LEFT FLANGE OUTSIDE RIGHT CORNER
CORNER SHAPESQUARE OUTSIDE RIGHT CORNER
SPECIAL FEATURESSEMI CIRCULAR OIL GROOVE 3/32 IN. WIDE BY 0.032 IN. DEEP IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
1997913Interchangeable
interchangeable cross-reference
interchangeable
8487Interchangeable
interchangeable cross-reference
interchangeable
8M2079Interchangeable
interchangeable cross-reference
interchangeable
A15803Interchangeable
interchangeable cross-reference
interchangeable
88487Interchangeable
interchangeable cross-reference
interchangeable
17975Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 7838?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7838?
7838 is a CYLINDER ASSEMBLY,ACTUATING,LINE manufactured by Multibrackets. It is classified as a MRO (MRO_GENERAL).
What parts can replace 7838?
There are 18 known substitutes for 7838: 1997913, 8487, 8M2079 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 7838?
7838 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3120-00-340-3307. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7838

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026