PartsTable
Technical Data Sheet
Download PDF

7837663P004 — WASHER,FLAT

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

7837663P004: WASHER,FLAT.

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYAMIDE NYLON AND RUBBER SYNTHETIC OVERALL, thickness: 0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN, hole_diameter: 0.064 INCHES MINIMUM AND 0.104 INCHES MAXIMUM IN, overall_diameter: 0.360 INCHES MINIMUM AND 0.400 INCHES MAXIMUM IN, peripheral_shape_style: ROUND, center_hole_shape_style: ROUND. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-384-2556, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7837663P004
NSN: 5310-01-384-2556
FSC: 5310 — Nuts and Washers
CAGE: 03538 — LOCKHEED MARTIN CORPORATION DIV RMS (USA)
SPECIFICATIONS
materialPLASTIC POLYAMIDE NYLON AND RUBBER SYNTHETIC OVERALL
thickness0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN
hole_diameter0.064 INCHES MINIMUM AND 0.104 INCHES MAXIMUM IN
overall_diameter0.360 INCHES MINIMUM AND 0.400 INCHES MAXIMUM IN
peripheral_shape_styleROUND
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
material_document_and_classificationMIL-C-8068 TY2 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5310-01-384-2556
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 7837663P004 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL DIAMETER: 0.360 INCHES MINIMUM AND 0.400 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-C-8068 TY2 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
PERIPHERAL SHAPE STYLE: ROUND
•
MATERIAL: PLASTIC POLYAMIDE NYLON AND RUBBER SYNTHETIC OVERALL
•
CENTER HOLE SHAPE STYLE: ROUND
•
HOLE DIAMETER: 0.064 INCHES MINIMUM AND 0.104 INCHES MAXIMUM IN
•
THICKNESS: 0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL DIAMETER0.360 INCHES MINIMUM AND 0.400 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-C-8068 TY2 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
PERIPHERAL SHAPE STYLEROUND
MATERIALPLASTIC POLYAMIDE NYLON AND RUBBER SYNTHETIC OVERALL
CENTER HOLE SHAPE STYLEROUND
HOLE DIAMETER0.064 INCHES MINIMUM AND 0.104 INCHES MAXIMUM IN
THICKNESS0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
7837663P4Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 7837663P004?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7837663P004?
7837663P004 is a WASHER,FLAT.
What parts can replace 7837663P004?
There is 1 known substitute for 7837663P004: 7837663P4. Substitute compatibility should be verified for your specific system.
What is the NSN for 7837663P004?
7837663P004 is cataloged in the U.S. Government catalog under NSN 5310-01-384-2556. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7837663P004

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.