PartsTable
Technical Data Sheet
Download PDF

78250 — MICROCIRCUIT,DIGITAL

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

78250: MICROCIRCUIT,DIGITAL.

The MICROCIRCUIT,DIGITAL is a the manufacturer industrial component. Key specifications include material: STEEL COMP 8740 OVERALL, head_style: HEXAGON, head_height: 0.280 INCHES NOMINAL IN, thread_class: 3A A, thread_length: 1.000 INCHES MINIMUM IN, fastener_length: 4.840 INCHES MINIMUM AND 4.920 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-100-3666, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 78250
NSN: 3110-00-100-3666
NIINs: 001003666, 001488102, 002765514, 006395213
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 60038 — THE TIMKEN CORPORATION (USA)
SPECIFICATIONS
materialSTEEL COMP 8740 OVERALL
head_styleHEXAGON
head_height0.280 INCHES NOMINAL IN
thread_class3A A
thread_length1.000 INCHES MINIMUM IN
fastener_length4.840 INCHES MINIMUM AND 4.920 INCHES MAXIMUM IN
style_designatorCOUNTERBORE UNTHREADED
thread_directionRIGHT-HAND
counterbore_depth0.068 INCHES MINIMUM AND 0.093 INCHES MAXIMUM IN
surface_treatmentCADMIUM OVERALL
width_between_flats0.740 INCHES MINIMUM AND 0.752 INCHES MAXIMUM IN
counterbore_diameter0.501 INCHES MINIMUM AND 0.508 INCHES MAXIMUM IN
NSN3110-00-100-3666
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 78250 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: STEEP ANGLE
•
CONE CORNER RADIUS: 0.0938 INCHES NOMINAL IN
•
CONE WIDTH: 1.3085 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
BORE DIAMETER: 2.5000 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORSTEEP ANGLE
CONE CORNER RADIUS0.0938 INCHES NOMINAL IN
CONE WIDTH1.3085 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
BORE DIAMETER2.5000 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 3
3373450Reference document
Same NSN cross-reference
Reference document — Secondary reference
119276Reference document
Same NSN cross-reference
Reference document — Secondary reference
160438Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 78250?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 78250?
78250 is a MICROCIRCUIT,DIGITAL. It is classified as a MRO (MRO_GENERAL).
What parts can replace 78250?
There are 3 known substitutes for 78250: 3373450, 119276, 160438. Substitute compatibility should be verified for your specific system.
What is the NSN for 78250?
78250 is cataloged in the U.S. Government catalog under NSN 3110-00-100-3666. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 78250