PartsTable
Technical Data Sheet
Download PDF

782-7667088 — PIN,SPRING

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

782-7667088: PIN,SPRING.

The PIN,SPRING is a the manufacturer industrial component. Key specifications include diameter: 0.375 INCHES NOMINAL IN, material: STEEL OVERALL, nut_style: HEXAGON, thread_class: 2B, thread_series: UNIFIED NATIONAL COARSE (UNC), overall_length: 1.980 INCHES MINIMUM AND 2.020 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-641-3523, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
782-7667088
NSN: 5310-01-641-3523
NIINs: 016413523, 016413945
FSC: 5310 — Nuts and Washers
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
diameter0.375 INCHES NOMINAL IN
materialSTEEL OVERALL
nut_styleHEXAGON
thread_class2B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
overall_length1.980 INCHES MINIMUM AND 2.020 INCHES MAXIMUM IN
style_designatorSLOTTED
thread_directionRIGHT-HAND
material_thickness0.077 INCHES NOMINAL IN
nominal_thread_size0.250 INCHES IN
end_item_identificationDOOR, WPNS, ELEVATOR
thread_quantity_per_inch20
NSN5310-01-641-3523
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 782-7667088 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE-J2295 NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.250 INCHES IN
•
NUT STYLE: HEXAGON
•
THREAD CLASS: 2B
•
THREAD QUANTITY PER INCH: 20
TECHNICAL CHARACTERISTICS
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
MATERIAL DOCUMENT AND CLASSIFICATIONSAE-J2295 NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.250 INCHES IN
NUT STYLEHEXAGON
THREAD CLASS2B
END ITEM IDENTIFICATIONDOOR, 96X80 WP
THREAD QUANTITY PER INCH20
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
J2295A194C2R04-Z7Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 782-7667088?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 782-7667088?
782-7667088 is a PIN,SPRING.
What parts can replace 782-7667088?
There is 1 known substitute for 782-7667088: J2295A194C2R04-Z7. Substitute compatibility should be verified for your specific system.
What is the NSN for 782-7667088?
782-7667088 is cataloged in the U.S. Government catalog under NSN 5310-01-641-3523. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 782-7667088