PartsTable
Technical Data Sheet
Download PDF

780-558-1G6-WS — COVER,PROTECTIVE,DUST AND MOISTU

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

780-558-1G6-WS: COVER,PROTECTIVE,DUST AND MOISTU.

COVER,PROTECTIVE,DUST AND MOISTU. Key specifications include material: RUBBER, special_features: 6 INCH NYLON ROPE WITH LOOP ON ONE END AND EYLET ON OTHER IN, length_under_shoulder: 0.580 INCHES NOMINAL IN, end_item_identification: CASS H-60 OTPS H-60 NUMBER 5512, open_end_inside_diameter: 1.343 INCHES NOMINAL IN, closed_end_overall_diameter: 1.911 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-574-9205, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
780-558-1G6-WS
NSN: 5340-01-574-9205
FSC: 5340 — Hardware, Commercial
CAGE: 06324 — GLENAIR, INC. (USA)
SPECIFICATIONS
materialRUBBER
special_features6 INCH NYLON ROPE WITH LOOP ON ONE END AND EYLET ON OTHER IN
length_under_shoulder0.580 INCHES NOMINAL IN
end_item_identificationCASS H-60 OTPS H-60 NUMBER 5512
open_end_inside_diameter1.343 INCHES NOMINAL IN
closed_end_overall_diameter1.911 INCHES NOMINAL IN
material_document_and_classification780-558 MFR REF ALL MATERIAL RESPONSES
part_name_assigned_by_controlling_agencyCOVER PROTECTIVE
NSN5340-01-574-9205
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 780-558-1G6-WS MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CLOSED END OVERALL DIAMETER: 1.911 INCHES NOMINAL IN
•
LENGTH UNDER SHOULDER: 0.580 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: 780-558 MFR REF ALL MATERIAL RESPONSES
•
OPEN END INSIDE DIAMETER: 1.343 INCHES NOMINAL IN
•
MATERIAL: RUBBER
TECHNICAL CHARACTERISTICS
CLOSED END OVERALL DIAMETER1.911 INCHES NOMINAL IN
LENGTH UNDER SHOULDER0.580 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATION780-558 MFR REF ALL MATERIAL RESPONSES
SPECIAL FEATURES6 INCH NYLON ROPE WITH LOOP ON ONE END AND EYLET ON OTHER IN
OPEN END INSIDE DIAMETER1.343 INCHES NOMINAL IN
PART NAME ASSIGNED BY CONTROLLING AGENCYCOVER PROTECTIVE
END ITEM IDENTIFICATIONCASS H-60 OTPS H-60 NUMBER 5512
MATERIALRUBBER
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 780-558-1G6-WS?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 780-558-1G6-WS?
780-558-1G6-WS is a COVER,PROTECTIVE,DUST AND MOISTU.
What is the NSN for 780-558-1G6-WS?
780-558-1G6-WS is cataloged in the U.S. Government catalog under NSN 5340-01-574-9205. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 780-558-1G6-WS