PartsTable
Technical Data Sheet
Download PDF

780-002-09G03-01C — CAP,PROTECTIVE,DUST AND MOISTURE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

780-002-09G03-01C: CAP,PROTECTIVE,DUST AND MOISTURE.

CAP,PROTECTIVE,DUST AND MOISTURE. Key specifications include material: RUBBER SILICONE, design_type: FRICTION AND MOLDED, overall_diameter: 1.250 INCHES NOMINAL IN, opening_inside_diameter_for_which_designed: 0.650 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-656-0013, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
780-002-09G03-01C
NSN: 5340-01-656-0013
FSC: 5340 — Hardware, Commercial
CAGE: 06324 — GLENAIR, INC. (USA)
SPECIFICATIONS
materialRUBBER SILICONE
design_typeFRICTION AND MOLDED
overall_diameter1.250 INCHES NOMINAL IN
special_featuresHAS A 0.5 INCH DIAMETER NYLON ROPE LANYARD, 3.0 INCHES LONG. THE EYELET OPENING IS 0.130 TO 0.150 INCHES IN DIAMETER. THE BODY IS CONDUCTIVE. IN
opening_inside_diameter_for_which_designed0.650 INCHES NOMINAL IN
NSN5340-01-656-0013
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 780-002-09G03-01C MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DESIGN TYPE: FRICTION AND MOLDED
•
OVERALL DIAMETER: 1.250 INCHES NOMINAL IN
•
OPENING INSIDE DIAMETER FOR WHICH DESIGNED: 0.650 INCHES NOMINAL IN
•
MATERIAL: RUBBER SILICONE
TECHNICAL CHARACTERISTICS
DESIGN TYPEFRICTION AND MOLDED
OVERALL DIAMETER1.250 INCHES NOMINAL IN
OPENING INSIDE DIAMETER FOR WHICH DESIGNED0.650 INCHES NOMINAL IN
SPECIAL FEATURESHAS A 0.5 INCH DIAMETER NYLON ROPE LANYARD, 3.0 INCHES LONG. THE EYELET OPENING IS 0.130 TO 0.150 INCHES IN DIAMETER. THE BODY IS CONDUCTIVE. IN
MATERIALRUBBER SILICONE
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 780-002-09G03-01C?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 780-002-09G03-01C?
780-002-09G03-01C is a CAP,PROTECTIVE,DUST AND MOISTURE.
What is the NSN for 780-002-09G03-01C?
780-002-09G03-01C is cataloged in the U.S. Government catalog under NSN 5340-01-656-0013. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 780-002-09G03-01C