PartsTable
Technical Data Sheet
Download PDF

77C707835P11VM — WASHER,SPRING TENSION

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

77C707835P11VM: WASHER,SPRING TENSION.

The WASHER,SPRING TENSION is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1074 OVERALL, hole_diameter: 0.961 INCHES NOMINAL IN, overall_height: 0.087 INCHES NOMINAL IN, outside_diameter: 1.235 INCHES NOMINAL IN, surface_treatment: CADMIUM OVERALL, material_thickness: 0.043 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-250-4082, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
77C707835P11VM
NSN: 5310-01-250-4082
FSC: 5310 — Nuts and Washers
CAGE: 03950 — NAVAL INVENTORY CONTROL POINT MECHANICSBURG (USA)
SPECIFICATIONS
materialSTEEL COMP 1074 OVERALL
hole_diameter0.961 INCHES NOMINAL IN
overall_height0.087 INCHES NOMINAL IN
outside_diameter1.235 INCHES NOMINAL IN
surface_treatmentCADMIUM OVERALL
material_thickness0.043 INCHES NOMINAL IN
material_document_and_classificationMIL-S-17919 MATERIAL 4 (SAE1074) MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationQQ-P-416 TYPE II CLASS 2 (G.E. SPEC F70C4B2) FED SPEC SINGLE TREATMENT RESPONSE OVERALL
reference_number_differentiating_characteristicsMAGNETIC PERMEABILITY SHALL NOT EXCEED 2.0 AFTER FABRICATION
NSN5310-01-250-4082
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 77C707835P11VM · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TYPE II CLASS 2 (G.E. SPEC F70C4B2) FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-17919 MATERIAL 4 (SAE1074) MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
OUTSIDE DIAMETER: 1.235 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.043 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM OVERALL
•
MATERIAL: STEEL COMP 1074 OVERALL
•
HOLE DIAMETER: 0.961 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.087 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416 TYPE II CLASS 2 (G.E. SPEC F70C4B2) FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-17919 MATERIAL 4 (SAE1074) MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
OUTSIDE DIAMETER1.235 INCHES NOMINAL IN
MATERIAL THICKNESS0.043 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM OVERALL
MATERIALSTEEL COMP 1074 OVERALL
HOLE DIAMETER0.961 INCHES NOMINAL IN
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICSMAGNETIC PERMEABILITY SHALL NOT EXCEED 2.0 AFTER FABRICATION
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 2
77C707835P011Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
77C707835P11Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 77C707835P11VM?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 77C707835P11VM?
77C707835P11VM is a WASHER,SPRING TENSION.
What parts can replace 77C707835P11VM?
There are 2 known substitutes for 77C707835P11VM: 77C707835P011, 77C707835P11. Substitute compatibility should be verified for your specific system.
What is the NSN for 77C707835P11VM?
77C707835P11VM is cataloged in the U.S. Government catalog under NSN 5310-01-250-4082. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 77C707835P11VM

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.